Products

100-200 kg/h Small Biomass Pellet Production Line for Straw and Lavender
video
100-200 kg/h Small Biomass Pellet Production Line for Straw and Lavender

100-200 kg/h Small Biomass Pellet Production Line for Straw and Lavender

As a multifunctional biomass material, wood chip pellets have broad application prospects in many fields such as energy, agriculture, and environmental protection.

Features

 
Key Takeaways

Quick answer: A 100-200 kg/h Small biomass Pellet Production Line presses straw, lavender waste and blended feed into artisan pellets, and when the mix carries an abrasive additive such as basalt rock meal, die and roller wear becomes the design driver. Hardened die and roller sets are available, and their exact material and hardness are confirmed on the factory technical sheet.

  • Spare roller and die sets are quoted as part of the package, and combined shipping to Bulgaria can be arranged on a per-inquiry basis.
  • The requested MK-200B is not a model in our range; the machine that covers 100-200 kg/h runs a 15 kW main drive.
  • Basalt rock meal is abrasive, so die and roller life, not press capacity, becomes the limiting factor on this line.
  • SKF bearings and Siemens motors are handled as a customer-specified brand option, confirmed in the offer's technical annex.

Home-scale automatic line: hammer mill, flat die press and cooling bin.

01What Makes a 100-200 kg/h Small Biomass Pellet Production Line Different From a Hobby Mill?

There is a wide gap between a benchtop pellet mill and a small production line, and it is not just the size of the motor. A hobby mill makes a bag on a weekend. A production line takes unfriendly feed, keeps a rate, and replaces parts on a schedule. For a boutique project such as NATURA SERVATA, the second kind is what you need.

Where the boutique scale sits between hobby and commercial

A 100-200 kg/h line is artisanal in output and industrial in construction. It runs crusher, hammer mill, mixer, pellet press, cooler and bagger, but at a scale a small team can operate. The difference from a hobby mill is that the press is built for continuous running, the components are serviceable, and the wear parts are designed to be changed rather than endured.

The core set: crusher, mixer, pellet mill, cooler, bagging

The line has to reduce straw and lavender stalks, blend the additives evenly, press the mix, cool it and bag it.

Step 1 Intake of dry straw and lavender waste Step 2 Crushing of stalks and leaves Step 3 Hammer milling to a 3-5 mm fraction Step 4 Mixing with algae extract and basalt meal Step 5 Pelletizing on a flat die press Step 6 Cooling and bagging of artisan pellets

small biofuel pellet making production line

 

If you want to see the smaller end of this family, the home wood pellet maker line page covers the compact builds, the homemade biomass pellet plant page looks at low-volume setups, and the wood pellet production line for home use page covers single-owner installations.

02How Do Dry Straw and Lavender Stalks Behave in a small biomass pellet maker production line?

Straw and lavender are not sawdust, and treating them the same way is the first mistake to avoid. Both are fibrous and light, and both need the right grind before the press can densify them.

Reference: FAO bioenergy from agricultural residues

Cutting dry straw to a pelletizable fraction

Dry straw is tough and stringy. It resists a clean cut and tends to wrap around shafts if the grinder is not set for it, so straw needs a crusher and a hammer mill operating as a pair, with the screen sized to cut the fibres short rather than tear them. Short, even fibre feeds the die smoothly; long fibre bridges in the hopper and starves the press.

Lavender stalks and leaves as a base feed

Lavender waste, the stalks and leaves left after oil extraction, is a light, dry, fibrous feed that pellets well once it is ground fine and even. It is lower in bulk density than wood, so the same hopper volume holds less, which means the feed screw has to be sized by volume, not just by mass. Blended with straw, lavender makes a consistent base for an artisan pellet.

03Why Does Basalt Rock Meal Wear Dies and Rollers Faster Than Plain Sawdust?

This is the heart of your project, and it deserves a straight answer. Basalt rock meal is a hard, abrasive mineral. Mixed into the feed, it does not melt or bind; it grinds.

What mineral additives do to compression surfaces

Every pellet passes through the die under high pressure, and an abrasive mineral in the mix turns that passage into a slow grinding operation. The die holes wear, the rollers scuff, and the machine loses its edge gradually rather than suddenly. Plain sawdust barely touches the steel; basalt-laden feed works on it every second the press runs. That is why, on this line, die and roller life becomes the limiting factor long before press capacity does.

Reading the early warning signs of die wear

Wear announces itself before it stops production. Output falls at the same settings, press temperature creeps up as more energy goes into friction, pellet surfaces start to crack or crumble, and a worn roller develops flats. Watching for those signs and responding early is what keeps an abrasive feed economical. Ignoring them means the die fails at the worst time instead of being changed on a quiet afternoon.

04How Should Algae and Seaweed Extract Additives Be Blended Before Pelletizing?

Algae and seaweed extract act as a binder, and the value of a binder is entirely in how evenly it is spread. A clump of binder in one part of the batch does nothing for the rest.

Dosing binders into the mix

The additive is dosed at a low percentage and blended through the whole batch. The aim is not to soak the feed but to coat it, so every particle carries a thin share of binder into the die. Over-dosing wastes material and can make the mix sticky; under-dosing leaves the pellet weak in the parts that missed the binder. Even distribution matters more than the exact dose.

Mixer options for small abrasive batches

At boutique scale, batch mixers do the job.

Model Type Batch / capacity Power
LX-HY0.3 U-shaped mixer 150 kg/batch 2.2 kW
LX-HY0.6 U-shaped mixer 300 kg/batch 4 kW
LX-HY1.0 U-shaped mixer 500 kg/batch 7.5 kW
SSHJ-0.5 double-shaft paddle 250 kg/batch 5.5 kW
SSHJ-1.0 double-shaft paddle 500 kg/batch 11 kW

 

For an abrasive batch the double-shaft paddle mixers blend faster and more evenly, which matters when one of the ingredients is a hard mineral you want spread thinly. Match the batch size to a short run of the press so the mix is used before it can stratify.

0001

000820230216161647

05Is MK-200B a Model We Supply, and What Is the Honest Equivalent?

You asked specifically for the MK-200B with a 7.5 kW motor. We need to be clear on this point, because it protects you: MK-200B is not a model in our range. We do not build or supply a machine under that code, and we will not put our name on a press and call it an MK-200B to match the inquiry.

Why we do not relabel machines to match inquiry codes

When a machine is sold under a code the maker does not use, the trail breaks. The die you reorder later may not fit the press you bought, and the spare-roller dimensions in your maintenance file may not match the machine on the floor. Keeping our own model numbers means every part, record and reorder points to the same real machine.

Which Press Covers the 100-200 kg/h Band?

The machine that covers your 100-200 kg/h band runs a 15 kW main drive: a 4-6 mm pellet size, 0.5 t and a footprint of 1400*600*1000 mm. It is the smallest flat die press in our range, and it is the match to your capacity target.

Model Capacity Power Pellet size Weight Dimension
RKL-250 100-200 kg/h 15 kW 4-6 mm 0.5 t 1400*600*1000
RKL-300 150-250 kg/h 22 kW 4-6 mm 0.65 t 1780*670*1000
RKL-350 100-300 kg/h 30 kW 4-8 mm 0.76 t 1860*670*1600
RKL-400 300-600 kg/h 37 kW 4.5-10 mm 2.2 t 1900*850*1750
RKL-450 500-800 kg/h 55 kW 4.5-10 mm 4.3 t 2300*1100*1900
RKL-550 1000-1500 kg/h 90 kW 4.5-12 mm 5.5 t 2350*1100*2050

It is worth being equally clear about the 7.5 kW figure. Our smallest flat die press runs a 15 kW main drive, so a 7.5 kW machine is below it, not above it. We would rather tell you that than quote a motor you cannot get. If your throughput target is firm at 100-200 kg/h, our 15 kW flat die press is the machine; if you want a smaller motor, that is a different class of machine that we do not build. The small type wood pellet line page shows where this press sits in the compact range. Send us your additive share and base material and we will confirm the set.

biomass pellet machine manufacturers

fuel pellet making machine

06How Do You Reach a 3-5 mm Grind Before the Pellet Press?

Your requirement is a 3-5 mm fraction out of the crusher, and it is worth separating two numbers that are easy to confuse. The 3-5 mm figure is the grind size going into the press, not the finished pellet diameter. Getting that distinction right is what keeps the die and the screen specified correctly.

Hammer mill screen sizing for straw and stalks

The screen in the hammer mill sets the grind. A finer screen cuts the straw and lavender fibre shorter, which feeds the die more evenly and produces a denser pellet. For a 3-5 mm target, the screen is chosen to hold that fraction, and the mill is run at a rate that keeps the grind even rather than surging.

Model Power Capacity Package size (mm)
HM-158B 1.5 kW 60-120 kg/h 750*450*730
HM-198B 3 kW 120-250 kg/h 1000*750*1120
HM-420B 7.5 kW 250-500 kg/h 1200*1000*1220
HM-500B-28B 11 kW 400-800 kg/h 1500*650*560
HM-50B-40B 22 kW 800-1000 kg/h 1900*1100*1270
HM-50B-60B 37 kW 1000-1600 kg/h 1900*1240*1270

For a 100-200 kg/h press, a 7.5 kW hammer mill covers the duty with margin. Where the straw is tough and the screen has to be fine, a mill with more screen area offers steadier grinding.

000320231201102604

Why grind size drives pellet density

A fine, even grind compacts better than a coarse, uneven one. Coarse fibre leaves gaps in the pellet that weaken it, and a mix of fine and coarse compresses unevenly, which stresses the die. Because your mix also carries an abrasive mineral, an even grind is doubly useful: it reduces the pressure spikes that accelerate wear. Grind control is not just a quality setting on this line; it is part of protecting the die.

07Can We Configure SKF Bearings and Siemens Motors on Request?

You asked whether the press can carry SKF bearings and a Siemens motor. The bearings and motor brand are not fixed fields in our published machine tables, so the accurate answer is this: key bearings and motors can be configured to your nominated brands, and the final specification is confirmed in the technical annex of the offer.

That wording matters, and here is why. A brand request is easy to say yes to and harder to guarantee across every sub-assembly. Rather than promise a brand on every bearing, we confirm which bearings and which motor are open to your specification, then lock the exact list into the offer so the machine that ships matches the document you signed. If a nominated brand is not available in the required size at the time of order, we tell you before the order is placed, not after.

08Which Hardened Die and Roller Spare Sets Suit Abrasive Basalt Feeds?

You asked for two or three extra sets of rollers and dies with increased hardness. We can supply hardened die and roller sets, and we will confirm the exact material and hardness on the factory technical confirmation sheet rather than quoting a number here.

What a hardened set is meant to do

An abrasive feed such as basalt-blended biomass wears the die and rollers faster than plain wood, so a set designed for that duty is worth having. The point of a hardened set is to spread the wear over more running hours before the die loses its edge, which stretches the interval between changes and keeps the press running at rate for longer.

Why we confirm material and hardness, not quote them

We do not publish a hardness figure or a steel grade in this material, because the right specification depends on your exact feed and running conditions, and a number copied from a general table would mislead you. The material and hardness are set on the factory technical confirmation sheet for your order, and that sheet is what your spare-parts reorders are built against. Ask for the hardened spare set with your feed sample and we will define it.

09What Service Life Can Dies and Rollers Reach With a Proper Spare Parts Plan?

No maker can promise a fixed service life for a die without knowing the feed, so be wary of a flat number. What we can do is describe how to plan around wear so that life is as long as it can be.

Planning 2-3 spare sets around an abrasive feed

With an abrasive additive in the mix, we recommend holding two to three spare sets of dies and rollers. That is not over-ordering; it is what lets you change a worn set and keep running without waiting for a shipment. On a boutique line, a spare set on the shelf is the difference between a short maintenance stop and a week of downtime.

Rotation and inspection habits that extend life

Wear parts last longer when they are managed. Inspect rollers and dies on a set schedule, not only when output drops, and check for flats, scuffing and die-hole wear. Rotate rollers so they wear evenly, and keep the grind and moisture steady, because a variable feed accelerates wear. The press itself does not decide how long a die lasts; the feed and the maintenance habits around it do.

00020047IMG20230419145510

0008IMG20230419150402

10How Does the flat die wood pellet machine Working Principle Handle Light, Fibrous Biomass?

A flat die press suits light, fibrous feed, which is exactly what straw, lavender and a mineral-blended mix are.

Fiber length and conditioning before the die

Rollers run over a flat, perforated die and force the material through the holes. The friction of that passage heats the feed until its natural binders soften and flow, and the pellet sets as it cools. Fibrous feed needs short, even fibre to feed the die smoothly, which is why the grind matters so much. Condition the mix to an even moisture and fibre length and the flat die handles it comfortably.

Pellet size options on flat die machines

The flat die press offers 4-6 mm pellet sizes, so you can produce a small artisan pellet suited to boutique stoves and to the agricultural pellet market you are targeting. Pellet diameter is set by the die; the 3-5 mm grind size upstream is a separate setting that stays constant while you change dies. Keeping those two numbers distinct in your head keeps the whole line specified correctly. The making wood pellets line page walks the pressing step in more detail.

11What Advantages and Application Scenarios Suit a Boutique Artisan Pellet Project?

A line this size suits a small, branded operation rather than a bulk fuel business, and that is a strength.

A branded, small-batch product

At 100-200 kg/h a project can produce a distinctive pellet, whether that is a lavender-blended agricultural pellet or a boutique fuel for a local market, and sell it on its story rather than on the lowest price per tonne.

Low entry cost and control

The line is small enough to fit a workshop, run on a modest supply and operate with a small team, which keeps the entry cost and the running cost low. It also lets the owner control quality closely, which matters when the product is branded.

Fit for agricultural and specialty use

Straw, lavender waste and blended feeds suit agricultural and specialty markets, and a small line can serve them without the scale a fuel business needs. If you later want a larger, more traditional wood line, the large pellet making line for wood page shows the other end of the range. Where the layout has to fit an existing building, the customized design home wood pellet maker line page shows how a line is tailored to a specific space.

12Customer Requirements Addressed: The Bulgaria (Varna/Burgas/Gabrovo) Inquiry, Point by Point

Your inquiry raised eleven distinct points, so this section answers each one rather than grouping them.

  1. Base materials, dry straw and lavender waste: both are fibrous and light; both pellet well once crushed and ground to an even 3-5 mm fraction.
  2. Algae and seaweed extract: used as a binder, dosed at a low percentage and blended evenly through the batch so every particle carries a share into the die.
  3. Basalt rock meal, abrasive: the abrasive mineral wears the die and rollers, so wear-part life becomes the design driver. Hardened die and roller sets are available.
  4. Capacity 100-200 kg/h: the 15 kW flat die press covers this band, with a 4-6 mm pellet size.
  5. Straw crusher and hammer mill for a 3-5 mm fraction: a hammer mill with the screen set for a 3-5 mm grind; note this is the grind size, not the pellet size.
  6. MK-200B: not a model in our range. The equivalent for 100-200 kg/h is our smallest flat die press, which carries a 15 kW main drive, so a 7.5 kW machine is below our range.
  7. SKF bearings and Siemens motor: configured as a customer-specified brand option, with the final list confirmed in the technical annex of the offer.
  8. Two to three extra sets of hardened rollers and dies: available, with material and hardness confirmed on the factory technical confirmation sheet.
  9. Combined shipping for both machines: can be arranged. We pack the set for one shipment where the schedule allows.
  10. Shipping to Varna or Burgas port, or to the Gabrovo region: we quote freight per inquiry against your chosen port or door point. No freight figure is fixed before we know the route.
  11. Distributor or service point in Turkey or Europe: we support this line remotely and can discuss service arrangements for your region as part of the offer.

13How Are Combined Shipping, Installation and Warranty Handled for Bulgaria?

Logistics for a small two-machine set is simpler than for a full line, but it still needs planning.

Combined shipping and delivery

We can combine the machines into one shipment where the dimensions and the schedule allow, which reduces handling and usually the freight. Delivery terms are quoted per inquiry, on an EXW or FOB basis, and priced to your chosen port or door point once we have the route. We do not fix a freight number before we know where it is going.

Installation, commissioning and warranty

For a compact set, remote commissioning over video is usually enough: we walk your team through alignment, wiring checks, the first run and the die-change procedure. On-site help can be arranged where the site prefers it. Warranty terms and the spare-parts list are set out in the offer, and because this line runs an abrasive feed, we build the spare-set recommendation into the same document. Send us your port or door point and we will quote the freight.

H2-14FAQ: Lead Time, EXW/FOB/CIF Terms and Spare Parts Packages for Small Biomass Lines

Q1: What delivery terms do you quote? A: Itemised, on an EXW or FOB basis, with CIF priced once we have your destination port. Freight to a named port or door point is quoted per inquiry.

Q2: What is the lead time for a small biomass pellet line? A: The schedule is confirmed with the offer and depends on the final scope, including whether hardened die and roller sets are included. A standard set is the shorter route.

Q3: Can you supply the spare die and roller sets in one order? A: Yes. Two to three extra sets can be included with the machines, with material and hardness confirmed on the factory technical confirmation sheet.

Q4: Will the press run straw and lavender without a dryer? A: Dry straw and lavender waste can go straight to grinding and pressing. If the feed takes on moisture in storage, it must be dried back into the working band first.

Q5: Is a distributor available in Europe or Turkey? A: We support this line remotely and can discuss service arrangements for your region. Ask about service cover when you request the quote.

 
Certification and honour records held for the pellet line series.

20260424133312

20260428114810

20260428115513

 

Will abrasive additives actually pellet? Describe your base material and the additive share, and we will confirm the die and roller specification and the spare-part kit that goes with it.

Hot Tags: 100-200 kg/h Small Biomass Pellet Production Line for Straw and Lavender, China 100-200 kg/h Small Biomass Pellet Production Line for Straw and Lavender manufacturers, suppliers, factory, Mobile Wood Pellet Line, wood pellets machine manufacturing plant, wood pellet line for home use, wood pellet production automation, Tree pellet production line, wood pellet lines

You Might Also Like

(0/10)

clearall