Products

Home Products Wood Pellet Production Line Details

Wood Sawdust Biomass Pellet Making Machine line

Wood Sawdust Biomass Pellet Making Machine line

Wood pellet machine line can generate wood pellets, which is a new type of fuel that has emerged in recent years. Traditionally, people rely on fossil energy such as coal, natural gas and oil to meet their energy needs.

Send Inquiry

Features

Products Description

The wood pellet machine line can process biomass raw materials such as wood chips, crop straw, coffee shells, wheat bran, and peanut shells. The granulator adopts flat die structure. The core component consists of a rotating flat die and a fixed roller. The flat mold is covered with many small holes, and the raw materials are pressed into them to form. A knife is installed under the flat die to control the length of the sawdust particles.

Product Parameters

Model	Capacity(kg/h)	Power(kw)	pellet size(mm)	Weight(t)	Dimension(mm)
RKL-250	100-200	15	4-6	0.5	14006001000
RKL-280	150-250	22	4-6	0.65	17606701600
RKL-300	100-300	30	4-8	0.76	18606701600
RKL-350	300-600	37	4.5-10	2.2	19008501750
RKL-400	500-800	55	4.5-10	4.3	230011001900
RKL-550	1000-1500	90	4.5-12	5.5	235011002050
RKL-800	1500-2500	160	4.5-12	6.8	320012352700
RKL-1200	3000-5000	320	4.5-15	19	380017004200

Product Analysis

Advantages

Vertical feeding, directly in place;
the mold is fixed, the pressure roller rotates, and the material is evenly wound centrifugally;
it is powered by a high-efficiency motor, which is connected to the gearbox through a universal joint (or the motor shaft is directly connected to the gearbox).
The gears inside the large gearbox are large and strong, suitable for pressing hard molding materials, the machine has high pressure, works more stably, and has a long life.

Notice

Turn on the machine and evenly add the stirred washingmaterial(oil). The granulator can discharge materials normally. Check whether all parts of the machine are working normally. Leave the material in the working chamber of the granulator, pour it into the granulator repeatedly with hydraulic pressure for no less than one hour, and add fine sand and oil appropriately according to the situation. The moisture and shape of the oil particles produced each time. After the mold washing is completed, add the crushed raw materials (make sure there are no impurities in the raw materials and the moisture content of the raw materials is maintained between 12% and 15%). Pay attention to feeding evenly and working continuously. Materials in the warehouse are continuous. Before shutting down every day, in order to ensure that the machine can work normally before starting up next time, materials mixed with oil are added to it and the oil particles are pressed out. , and then close.