Products
1 t/h Fuel Pellet Production Line
A wood pellet production line is a highly efficient and specialized system designed to transform various types of biomass materials into high - quality fuel pellets.
Features

Large wood pellet line layout: crusher, dryer, press section and cooling in sequence.
Bagging end of the large line, where finished pellets are weighed and packed.
01What Does a Complete 1 t/h Fuel Pellet Production Line Include?
Buyers rarely approach a 1 t/h fuel pellet production line cold. Most have watched a plant run, or walked through a competitor's flow, and they already know the shape of the process: sawdust in, bags out. The question worth spending an afternoon on is narrower. Which parts must be there, and which quiet add-ons decide whether the line holds its rated output or drifts down to two thirds of it by the third week.
The standard flow: crushing, conveying, pelletizing, cooling, bagging
A complete line follows a fixed sequence, and each stage exists to protect the one after it. Material is reduced in size, moved, densified, cooled, then packed.
Everything downstream of the press protects the pellet. Cooling lets the natural lignin set so the pellet hardens before it is handled. Screening pulls out fines that would otherwise loop back into the press or leave the gate as dust. A buyer who bolts a bagger straight onto the press outlet saves a little floor space and pays for it in pellet durability at the far end of the truck.
Which accessories (belt or screw conveyors, fans) close the loop
Conveyors move solids; fans move air and dust. Both are sized to the narrowest point in the line, which is the press hopper, not the intake. Over-specify the conveyors and you buy steel you never use; under-specify them and the press starves on the morning shift.
| Equipment | Type | Power | Capacity | Reach |
|---|---|---|---|---|
| KWX50YP | screw conveyor | 1.5 kW | 0-1000 kg/h | 2.5 m |
| KWX75YP | screw conveyor | 3 kW | 0-2000 kg/h | 3 m |
| KWX150YP | screw conveyor | 4 kW | 0-2000 kg/h | 3 m |
| TDSGQ50 | crawler conveyor | 1.5 kW | - | flexible routing |
| TLSS12 | stainless bucket elevator | 1.5 kW | - | vertical lift |
| TDSG10-25 | bucket elevator | 1.1-1.5 kW | - | vertical lift |
If you are weighing this scope against a wider plant, the complete wood pellet production line page walks the same stages at other capacity bands.

02How Do You Guarantee 1 Ton Per Hour of Finished Pellets, Not Just Feedstock?
This is the question that separates a useful quotation from a flattering one. When a supplier writes "1 t/h", does it mean one tonne of sawdust disappears into the hopper each hour, or one tonne of saleable pellets lands in the bagging bin? The gap between those two readings commonly runs 10 to 25 percent, and that gap is the difference between a line that meets your contract and one that quietly misses it.
Why our capacity figures count finished pellets
Every capacity figure on this page counts finished pellets. Feedstock throughput is always higher, because grinding losses, moisture removal and fines recycling all subtract from the mass that reaches the scale. We state the finished figure because that is the number your buyer pays against, and because a line sized on feedstock looks generous on paper and thin in the yard.
Actual output moves with three variables: the raw material, its moisture content, and the die configuration. Hard, dense feed presses more slowly than soft shavings, and a worn die drops rate before it fails. Treat the catalogued figure as a rated band and confirm your guaranteed value at trial.
Which Press Reaches 1 t/h?
Two press families can anchor this build. The flat die range tops out with a 1000-1500 kg/h machine at 90 kW, and the ring die range starts at a 1-1.5 t/h machine at 90 kW.
| Model | Capacity | Power | Pellet size | Weight | Dimension |
|---|---|---|---|---|---|
| RKL-250 | 100-200 kg/h | 15 kW | 4-6 mm | 0.5 t | 1400*600*1000 |
| RKL-300 | 150-250 kg/h | 22 kW | 4-6 mm | 0.65 t | 1780*670*1000 |
| RKL-350 | 100-300 kg/h | 30 kW | 4-8 mm | 0.76 t | 1860*670*1600 |
| RKL-400 | 300-600 kg/h | 37 kW | 4.5-10 mm | 2.2 t | 1900*850*1750 |
| RKL-450 | 500-800 kg/h | 55 kW | 4.5-10 mm | 4.3 t | 2300*1100*1900 |
| RKL-550 | 1000-1500 kg/h | 90 kW | 4.5-12 mm | 5.5 t | 2350*1100*2050 |


| Model | Capacity | Power | Particle size | Product size (mm) | Weight |
|---|---|---|---|---|---|
| MKLH560 | 1-1.5 t/h | 90 kW | 4-12 mm | 2620*1640*1770 | 5.2 t |
| MKLH560A | 1.5-2 t/h | 132 kW | 4-12 mm | 2680*1560*1770 | 5.6 t |
| MKLH700 | 2-2.5 t/h | 160 kW | 4-12 mm | 2560*1380*2020 | 7.2 t |
| MKLH860A | 3-4 t/h | 250 kW | 4-12 mm | 3150*1550*2240 | 9.5 t |


The largest flat die press, rated 1000-1500 kg/h at 90 kW, sits right on the 1 t/h line, while the smallest ring die machine covers 1-1.5 t/h at 90 kW from the other direction. Deciding between them comes down to die type, pellet quality and how much headroom you want. Tell us your moisture and target diameter and we will state the guaranteed finished tonnage for your mix in the offer.
03Should You Choose Two 0.5 t/h Presses or a Single 1 t/h Pellet Mill?
Clients who have run process plants often ask for two smaller presses rather than one big one, and there is a real logic to it. The trade is between uptime and everything else: floor space, cabling, spares and the cost of running two machines at half load.
| Factor | Two 0.5 t/h presses | One 1 t/h press |
|---|---|---|
| Redundancy | One press keeps running during a die change | Full stop for a die change |
| Floor space | Roughly double the footprint | Compact single line |
| Total drive power | Two motors, often higher combined kW | One larger motor, better specific energy |
| Spares | Two sets of dies and rollers to stock | One set |
| Labour | Still one operator, more walk-around | Simple single-machine routine |
| Control | Two loops to interlock and sync | One control loop |
Redundancy, floor space and power trade-offs
Two presses buy you insurance. If one goes down for a die swap, the plant keeps producing at half rate instead of stopping. For a plant selling into a fixed contract, that can matter more than efficiency. The price is roughly double the occupied area, two starters or two VFDs, and two dies in the spare-parts cabinet.
A single 1 t/h press usually wins on specific energy, because one larger motor at full load is more efficient than two smaller ones at partial load. It also simplifies the control layer, which reduces the number of interlocks a single operator has to watch.
What we recommend for dried Radiata pine shavings
For dried Radiata pine shavings at 10% moisture, a single 1 t/h class machine is the cleaner build. The feed is soft and consistent, so one press holds rate comfortably, and you keep the floor space for conveyors and a bagging station instead of a second machine. Two presses make sense only if the plant must run through die changes without losing output, or if you plan to scale one press's capacity later.
Ring die machines also deserve a look here. The smallest ring die unit handles continuous duty well and the vertical ring die pellet line page covers that route in detail.
04How Does the wood stove pellet maker production line Turn Dried Sawdust Into 6 mm Wood Pellets?
The pellet press does no cooking and adds no glue. It converts loose sawdust into a dense pellet using pressure, friction and the lignin already inside the wood. Understanding that principle tells you why moisture and grind matter so much.
Reference: Pellet Fuels Institute fuel standards
The mechanical-to-thermal pelletizing principle explained
Sawdust enters the die chamber, where rollers force it through tapered holes. The friction of that passage raises the temperature of the material to roughly the softening point of lignin, the natural binder in wood. Softened lignin flows and then cools as the pellet leaves the die, cementing the fibres into a hard cylinder. No external binder is needed for wood.
Two consequences follow. First, grind size must be even, because a mix of fines and chips compresses unevenly. Second, moisture must sit in a narrow band. Too wet and the pellet is soft and steams as it cools; too dry and there is not enough friction to reach binding temperature. The window is roughly 8 to 12 percent for wood.
Choosing and stocking 6 mm ring and flat die options
A 6 mm die is a standard fuel pellet size and is a normal catalogue item on the presses above.
| Pellet diameter | Typical use | Available across |
|---|---|---|
| 4-6 mm | residential stoves, fuel | RKL-250, RKL-300 |
| 4-8 mm | fuel and small boilers | RKL-350 |
| 4.5-10 mm | fuel, mixed use | RKL-400, RKL-450 |
| 4.5-12 mm | fuel, industrial boilers | RKL-550, MKLH series |
For a 1 t/h fuel line, 6 mm is the safe default. It feeds most stoves and small boilers without jamming, and it presses faster than a 4 mm die. Keep a spare die and a spare set of rollers on the shelf; a worn die hides its wear as falling output long before it cracks.

05Which Hammer Mill, Conveyors and Fans Match a 1 t/h wood pellet manufacturing line?
The press can only press what the front end hands it. Size the grinder and conveyor chain below the press and the whole line runs at the front end's pace, not the press's. Size it too far above and you pay for power you never use.
Hammer Mill Sizing Against 1 t/h Feed
A hammer mill must deliver ground material at a rate above the press rating, because it also absorbs surges. For a 1 t/h finished-pellet target, a mill in the 3-6 t/h class leaves comfortable margin once you allow for the fact that grinding pre-press runs at feedstock tonnage, which is higher than finished tonnage.
| Model | Rotor dia. | Main shaft | Power | Capacity | Dimension (mm) |
|---|---|---|---|---|---|
| SFSP56X30 | 560 mm | 2950 rpm | 11 kW | 1-2 t/h | 1400x860x1000 |
| SFSP56X36 | 560 mm | 2950 rpm | 22 kW | 3-4 t/h | 1430x860x1000 |
| SFSP56X40 | 560 mm | 2950 rpm | 37 kW | 5-6 t/h | 1630x860x1000 |
| SFSP65X45 | 650 mm | 2950 rpm | 45 kW | 7-8 t/h | 1720x870x1320 |
| SFSP65X60 | 650 mm | 2950 rpm | 55 kW | 10-12 t/h | 2000x960x1320 |
For a smaller or more compact variant, the light-duty hammer mill range covers lighter duties:
| Model | Power | Capacity | Package size (mm) |
|---|---|---|---|
| HM-420B | 7.5 kW | 250-500 kg/h | 1200*1000*1220 |
| HM-420B | 11 kW | 250-700 kg/h | 1200*1000*1220 |
| HM-50B-40B | 30 kW | 800-1300 kg/h | 2200*1100*1270 |
| HM-50B-60B | 45 kW | 1000-2000 kg/h |
2200*1240*1270 |

Are Radiata pine shavings and sawdust resin a problem?
Radiata pine is a softwood and pellets well. Its resin content is moderate and, once the material is dried to 10%, the resin softens during pressing and acts as an additional binder rather than a nuisance. The moisture target matters more than the species here. Dry it too far below 8% and you lose the friction the die needs; leave it above 12% and the pellets come out soft.
Shavings need one extra thought. They are bulky and light, so a grinder sized on mass may still choke on volume. Choose the screen and the feeding arrangement for shavings, not just for sawdust, and the mill will hold rate. If your feed is mainly chips rather than shavings, the wood chip pellet machine production line page is the closer starting point.
06Why Does 10% Moisture Sawdust Remove the Need for a Wood Dryer?
A dryer is the single most expensive stage to add, both in capital and in running cost, so it is worth being sure you need one. For this inquiry the answer is no, and the reasoning is straightforward.
The moisture window for fuel pelletizing
Wood pellets press best between roughly 8 and 12 percent moisture on a wet basis. Inside that band the lignin softens at die temperature, the pellet binds without added water, and the finished pellet holds its shape as it cools. Below the band the friction is too low to reach binding temperature; above it the feed turns to paste and the pellet steams and cracks.
At 10 percent, dried Radiata pine shavings sit inside the band with margin on both sides. Adding a dryer would mean paying to remove water you would then need to add back as conditioning steam. For this line, no dryer.
When to revisit a dryer decision (seasonal wet feed)
The exception is seasonal or variable feed. If the same plant will sometimes take green sawdust at 40 percent or more, or if storage lets material take on rain, the moisture can cross the band and a dryer becomes necessary. In that case the drying stage is sized on the wettest feed you will actually run, not the average. A wetter-feed line is a different design, and the 500 kg/h wood sawdust pelletizing line page covers the dryer-first approach.
For a steady diet of dried shavings at 10 percent, the money is better spent on a larger press or better bagging than on a dryer you will run empty.
07How Do PLC Control and VFDs Let a Single Operator Run the Whole Line?
A 1 t/h line is small enough for one person to run and large enough that doing it by hand is a losing game. Automation is what closes that gap, and it does it in two layers.
Which drives get VFDs and why
Variable frequency drives go on the motors whose speed you want to trim while running: the feeder, the conveyors and, where the press allows, the main drive. Trimming the feeder speed to match what the die will actually take is the single most useful control you have, because it stops the press from choking when feed surges.
VFDs also soften starts. A hammer mill or a press started across the line pulls a hard current spike; ramped by a VFD it starts gently, which is easier on the motor and the supply. Where the plant is on a weak connection, that alone can justify the drive.
Alarms, interlocks and single-person shift routines
The PLC ties the stages together so no machine runs into a blocked neighbour. If the press hopper fills, the feeder slows; if a conveyor stops, the stage behind it stops too. Alarms flag low feed, high press temperature and blocked ducts before they become breakdowns.
With that layer in place, a single operator sets the feed rate, watches the panel, and handles bagging and pallet movement. We also build around customer-specified brand components where needed, and both the fully automatic biomass pellet production and automatic fuel pellet production line pages show how far that automation layer can be taken.
08How Does the Semi-Automatic Packaging Station Fill, Weigh and Heat-Seal 15 kg Bags?
You asked for semi-automatic bagging: filling, weighing and heat sealing. That is exactly the scope we build, and the machine at the centre of it is a proven weighing bagger.
The Packing Machine: Weighing Accuracy and Bag Rate
| Model | Power | Weighing range | Bagging speed | Packaging capacity |
|---|---|---|---|---|
| DCS-Z-W-50 | 3 kW | 10-50 kg | 260-300 bags/h | 200-300 bags/h |
| Accuracy | Power supply | Air supply | Air consumption | Dimension |
|---|---|---|---|---|
| static +/-0.1%, dynamic +/-0.2% | 380V 50Hz, 4.5 kW | instrument air 0.6-0.8 MPa | 0.2 Nm3/min | 1200*1200*2400 mm |
The automatic quantitative packing machine covers 10-50 kg, so a 15 kg bag sits well inside its range, and its 260-300 bags/h rate outpaces a 1 t/h press. The unit combines an automatic weighing device, a conveying device, a sewing device and computer control.
Heat sealing versus sewn bags for 15 kg plastic packaging
For 15 kg plastic bags, heat sealing gives a clean, moisture-tight closure that suits retail pellet packaging. The bagger's standard closure is a sewing device, and a separate heat sealer is not a catalogue item with us, so we confirm the sealing arrangement as part of the project scope. Tell us the bag material and thickness, and we will specify the closure that works with it. Ask for a semi-automatic bagging layout sized to your 15 kg bag and we will match the station to the press.

09What Is Involved in Palletizing and Automatic Stretch Wrapping of Packed Pellets?
Bagging and palletizing are separate problems. The bagger fills and closes the bag; something else has to stack the bags and wrap the pallet.
Pallet patterns for 15 kg bags
A 15 kg bag stacks predictably, and a standard pallet pattern holds a fixed number of bags per layer. The pattern you choose sets the pallet footprint, the stack height and how much hand labour sits between the bagger and the stretch wrapper. Fewer, heavier layers speed wrapping; more, lighter layers stack more stably for long transport. We work the pattern out with you once the bag dimensions are fixed.
Confirming the stretch wrapper as a third-party or project item
Here we should be direct. An automatic stretch-wrapping system for finished pallets is not part of our own catalogue range. We can specify it as a project item and integrate it into the line layout, and we can coordinate a supplier so the wrapper matches your pallet size and throughput, but the wrapper itself is procured and confirmed separately rather than supplied as one of our machines. That keeps the promise honest: we will not list a wrapper in the quotation as though it came off our own floor.
Palletizing follows the same rule. Share your pallet dimensions and target pallets per shift and we will define the handling scope around the bagger.
10What Raw Materials and Application Scenarios Suit a 1 t/h Fuel Pellet Line?
A line rated at one tonne an hour serves a specific tier of the fuel market: serious enough to sell, small enough to run on a single shift and a single operator.
Feedstock this line handles
The core feed is dried wood residue: sawdust, shavings and fine chips. The range also presses softwood and hardwood blends, and with the right grind they take straw, rice husk and similar agricultural residue. Pine, spruce and fir press easily; denser hardwoods press more slowly and wear the die faster. Moisture, not species, is the gate everyone has to pass.
Where the output goes
A 1 t/h line is a good fit for a sawmill turning its own residue into a marketable product, a fuel distributor serving local stove and boiler customers, and a farm or estate heating several buildings. At one tonne an hour the plant fills roughly one 15 kg bag every few seconds while running, which is enough to supply a regional retail channel without a dedicated industrial site.
The 1 t/h large biomass pellet production line page looks at the same capacity from the biomass side.
11What Advantages Does This Highly Automated Pellet Line Offer Buyers?
The case for this build rests on four things a buyer can check.
First, labour. PLC control and VFD-trimmed feeding let one person run grinding, pressing, cooling and bagging in one shift. That removes the second and third salaries a manual line needs.
Second, capacity you can trust. Because the figure counts finished pellets, a 1 t/h rating relates to the tonnage you can sell, not the tonnage you can shovel in.
Third, a defined scope. The line ships as a set of named machines with named duties, so integration risk stays with us rather than landing on your site electrician.
Fourth, headroom. Running one 1 t/h class press at its rated band leaves a little room above target, so normal feed variation does not push the line off contract.
For a plant that sells into a fixed delivery schedule, the four gains above land as a line that keeps its commitments on its own, without a second hand on shift. Request an itemised quotation and we will set the scope against your own moisture and pellet size.
12Customer Requirements Addressed: Every Point From the Radiata Pine 1 t/h Inquiry
We answered your inquiry point by point rather than with a generic offer, because most of your questions had specific answers.
- 6 mm die: a 6 mm die is a standard catalogue option on the presses above, and it is the right default for fuel pellets on this line.
- Radiata pine suitability: pine is a softwood and pellets well. Once dried to 10 percent, its resin softens during pressing and helps bind rather than hindering. Species is not the risk; moisture is.
- 10 percent moisture and the dryer: at 10 percent on a wet basis you sit inside the 8 to 12 percent pelletizing window, so a dryer is normally not needed. It becomes necessary only if some of your feed arrives wetter, and that is a different design.
- 1 t/h figure: it is a rated band, counted on finished pellets, not feedstock, and confirmed for your specific mix and moisture at trial.
- Two 0.5 t/h presses versus one 1 t/h press: a single 1 t/h class press is our recommendation for consistent dried shavings, with two presses reserved for plants that must run through die changes.
- Complete list: hammer mill, pellet press, cooler and packaging unit, plus belt or screw conveyors and fans. All are in scope; the bagger above covers your packaging unit.
- PLC and VFD control for one operator: yes. VFDs on feeder and conveyors, PLC interlocking across stages, one control panel, one operator.
- Semi-automatic packaging: filling, weighing and heat sealing. Weighing and filling come from the automatic packing machine; the heat-sealing closure is confirmed with your bag material.
- Palletizing and stretch wrapping: the wrapper is a project item, specified and sourced separately, not one of our catalogue machines. We will integrate it into the layout.
- 15 kg plastic bags: the automatic quantitative packing machine covers 10-50 kg, so 15 kg sits comfortably in range at 260-300 bags/h.
- Email or WhatsApp contact: both work. Quotations and technical attachments go by email; quick clarifications are fine on WhatsApp.
13How Are Installation, Commissioning, Warranty and Spare Parts Managed for Overseas Lines?
Shipping a line is not the same as commissioning it, and the difference shows up in week one unless the plan is set before the machines leave.
Before the machines arrive
We send a site and power checklist matching your line layout. You confirm the 380V supply, the foundation pads, the compressed-air line for the bagger and the material flow through the building. Getting that done early removes most of the delays that stall an install.
Commissioning and the operator
On site, commissioning works through shaft alignment and drive checks first, then dry and live runs that trim feeder rates and die pressure against your own material. We also train the operator on the shift routine, the alarms and the die-change procedure. Remote guidance is often enough for a line this size; on-site commissioning can be arranged where the site calls for it.
Warranty and spares
Warranty and the spare-parts list are set out in the offer. For a fuel line, plan for spare dies, rollers and screens, plus bearings and drive belts, so a die change does not become a plant stop. We would rather you stock a spare die than run one to the point of failure. Send us your site and power details and we will prepare the commissioning plan.
14FAQ: Lead Time, EXW/FOB/CIF Quotation and Ordering a 1 t/h Fuel Pellet Production Line
Q1: What is the lead time for a 1 t/h fuel pellet production line? A: Lead time depends on the final scope and is confirmed with the offer. A standard build without a dryer is the shorter route; adding project items such as a stretch wrapper extends it.
Q2: Do you quote EXW, FOB or CIF? A: Quotations are itemised per machine and provided on an EXW or FOB basis with the offer, and we can quote CIF once we have your destination port. We do not publish list prices.
Q3: Is the 1 t/h output guaranteed? A: It is a rated band counted on finished pellets, and the guaranteed figure for your mix and moisture is stated in the offer and confirmed at trial.
Q4: Can the biomass pellet machine line run on 380V 50Hz power? A: Yes. The bagger is specified at 380V 50Hz and the rest of the line is configured to your supply at order. Confirm your voltage and frequency on the site checklist.
Q5: What spare parts should I stock? A: At minimum a spare die and a spare set of rollers, plus screens, bearings and drive belts. Spares fly with the main shipment at your option.
Q6: Can I see a running line or agree performance before ordering? A: We share run data and video of comparable lines and can arrange a trial against your material. The guaranteed finished tonnage is written into the offer.
Certification and honour records held for the pellet line series.



Hot Tags: 1 t/h Fuel Pellet Production Line, China 1 t/h Fuel Pellet Production Line manufacturers, suppliers, factory, pellet line for wood stove, complete wood pellet production line, home wood pellet line, wood pellet production fireplace, Pellet stove wood pellet production line, Industrial pellet production line
You Might Also Like
Send Inquiry




