Products

Home Products Charcoal Powder Extruder Details

Activated Carbon Powder Extrusion Equipment

Activated Carbon Powder Extrusion Equipment

Activated carbon powder extrusion equipment can produce very burn-resistant carbon rods.

Send Inquiry

Features

Products Description

First, the operator must strictly follow the requirements of the technicians to stand in the designated safe area to work, and each operator must be familiar with the relevant operating instructions of the equipment.
Second, the lubrication of the coal rod extruder must be carefully considered. If this aspect is not done well or very poorly, it will cause the equipment to not work properly, thus affecting production.
Third, before formal production, a trial run must be carried out, and formal production can only be carried out when all aspects are operating normally.

Product Parameters

Working type	Model	Capacity for coal	Capacity for charcoal	Power
Extruding Type	ET-1	200-250kg/h	500kg/h	11+0.55kw
	ET-2	250-500kg/h	500-1000kg/h	18.5+1.1kw
	ET-3	1500kg/h	not suitable for charcoal	22+3kw
Pressing Type	YM-140	1.86-2tons/h	0.93-1ton/h	7.5kw
	YM-160	1.86-2tons/h	0.93-1ton/h	11kw
	YM-220	1.25tons/h	2.5tons/h	15kw

Product Analysis

Fourth, the current and voltage must also meet the relevant requirements, and the coal feeding amount and moisture can be reasonably adjusted according to the current to ensure the formation of briquette.
Fifth, it is strictly forbidden to stand in front of the machine head to avoid being hurt by the sprayed materials.
Sixth, this point has actually been mentioned before, that is, it is strictly forbidden to use high-hardness materials to stir the materials during the production process. To avoid damaging the machine body.

1. It uses a hardened gear reducer with small size and high load-bearing capacity;
2. The internal impeller adopts a thickened blade design, and the impeller and the inner lining of the cylinder are made of wear-resistant precision casting materials, which has a service life 4-5 times longer than ordinary materials;
3. The head coal rod outlet is made of replaceable wear-resistant alloy steel, which is easy to replace;
4. The head and the cylinder are hinged, which can be opened during maintenance, and it is very convenient to replace the internal impeller and cylinder lining.