Products

Home Products Charcoal Powder Extruder Details

Intelligent Carbon Rod Extruder

Intelligent carbon rod extruder is a good helper for producing carbon rods.

Send Inquiry

Features

Products Description

When debugging the extruder, you must first do the preparation work before starting. Check whether the water, electricity, and gas systems in the equipment are normal, ensure that the water and gas lines are unobstructed and leak-free, whether the electrical system is normal, and whether the heating system, temperature control, and various instruments are working reliably; run the auxiliary machine at low speed without any equipment to observe whether the equipment is operating normally.

Product Parameters

Charcoal dust briquette extruding machine bbq coal stick charcoal extruder rice hull charcoal extruder machine
Working type	Model	Capacity for coal	Capacity for charcoal	Power
Extruding Type	ET-1	200-250kg/h	500kg/h	11+0.55kw
	ET-2	250-500kg/h	500-1000kg/h	18.5+1.1kw
	ET-3	1500kg/h	not suitable for charcoal	22+3kw
Pressing Type	YM-140	1.86-2tons/h	0.93-1ton/h	7.5kw
	YM-160	1.86-2tons/h	0.93-1ton/h	11kw
	YM-220	1.25tons/h	2.5tons/h	15kw

Product Analysis

Start the vacuum pump of the calibrating table and observe whether it works normally. After the temperature is constant, the machine can be started. Before starting, the bolts of the die head and the extruder flange should be tightened again to eliminate the difference in thermal expansion between the bolts and the die head. The order of tightening the die head bolts is to tighten them diagonally and apply force evenly. When the feeding is stopped, the plastic in the extruder is squeezed out and the screw is exposed. Turn off the power of the barrel and die head and stop heating. Turn off the power of the extruder and auxiliary machines to stop the screw and auxiliary machines.

Operators must be familiar with the structural characteristics of the extruder they operate, especially the structural characteristics of the screw, the characteristics of the heating and cooling control instruments, the characteristics of the die head and the assembly conditions, so as to correctly grasp the extrusion process conditions and operate the machine correctly.
Safety items that should be paid attention to during extrusion include: electrical, thermal, mechanical rotation and loading and unloading of heavy parts. The extruder workshop must be equipped with lifting equipment to install and disassemble heavy parts such as the die head and screw to ensure safe production.