Products
100-300 kg/h Small-Scale Wood Pellet Production Line
Wood pellet line is a kind of fuel that is squeezed into a shape by crushing wood chips, sawdust, crop straw, etc. Its main purpose is to replace coal combustion.
Features

01What Belongs on the Equipment Checklist for a 100-300 kg/h Small-Scale Wood Pellet Line?
Small-scale buyers usually arrive with the list already written. The useful question is not what the machines are called but whether each one in the set holds the rate you paid for. A 100-300kg/h small-scale wood pellet production line is only as strong as its weakest single item, and that item is rarely the pellet mill.
The nine items behind a turnkey small-scale order
Nine items make up a complete small-scale line. The first two reduce size, the next two blend and densify, and the rest cool, handle dust, weigh and close the bag.
- Wood crusher for larger feed pieces
- Wood chip mill to finish the grind before pressing
- Sawdust mixer to even out moisture and blend the feed
- Pellet mill to densify the mix
- Dust collector to control airborne fines
- Pellet cooling bin to set the pellets before bagging
- Bagging machine to fill the bags
- Weighing scale for bag-tolerance control
- Bag sealer to close each bag
We confirm all nine line by line further down the page, including the two we cannot quote as catalogue machines.

What changes between 100, 200 and 300 kg/h builds
The press is the item that sets the band, and our flat die range covers this range across three models. A 100-200 kg/h build leans on the 15 kW frame; a 200 kg/h target sits with the 22 kW frame at 150-250 kg/h; and the full 100-300 kg/h band is the 30 kW frame. Everything upstream and downstream is then sized to the press so the line does not starve or stall. Choosing the press first, and sizing the crusher, mixer, cooler and bagger around it, is what keeps a small build predictable. If you want the plant-scale version of the same logic, the small-scale wood pellet production line page carries the wider family.
02 Which Flat Die Press Covers the 100-300 kg/h Band?
The machine that covers your 100-300 kg/h band is our 30 kW flat die press: a 4-8 mm pellet size, 0.76 t and a footprint of 1860*670*1600 mm. It sits between the 22 kW frame at 150-250 kg/h and the 37 kW frame at 300-600 kg/h, so it is the natural pick for a small line that wants to reach 300 kg/h at the top of its band.
If your real requirement is closer to a steady 200 kg/h, the 22 kW frame at 150-250 kg/h is a smaller, cheaper machine that still clears your target. Send us your existing equipment list and we will match the press to the throughput you actually sell, not to a code.
03Which Wood Crusher and Wood Chip Mill Fit 100-300 kg/h wood fuel pellet making line?
Items one and two do the size reduction, and they work as a pair. The crusher takes chunky feed such as offcuts, slabs and branch wood, and the chip mill or hammer mill finishes the material fine enough for the die.
Hammer Mill Options for Chips and Offcuts
Hammer mills handle chips and small offcuts and produce a consistent grind.
| Model | Power | Capacity | Package size (mm) |
|---|---|---|---|
| HM-420B | 7.5 kW | 250-500 kg/h | 1200*1000*1220 |
| HM-500B-28B | 11 kW | 400-800 kg/h | 1500*650*560 |
| HM-50B-40B | 22 kW | 800-1000 kg/h | 1900*1100*1270 |
| HM-50B-40B | 30 kW | 800-1300 kg/h | 2200*1100*1270 |
| HM-50B-60B | 37 kW | 1000-1600 kg/h | 1900*1240*1270 |
For a 100-300 kg/h press a 7.5 kW hammer mill already covers the top of the band, which is a useful signal: the grinder is not the bottleneck at this scale, so it is better to buy a little margin than a lot of power.

Wood Crusher Sizing for Larger Feed Pieces
The wood crusher range takes the bigger pieces before milling.
| Model | Power | Capacity | Max feed size | Dimension (m) | Weight |
|---|---|---|---|---|---|
| MK-420 | 7.5 kW | 600-1000 kg/h | 15 cm | 1.4*0.8*1 | 240 kg |
| MK-600 | 30 kW | 2000 kg/h | 20 cm | 1.6*0.8*1.1 | 520 kg |
| MK-800 | 37 kW | 3000 kg/h | 25 cm | 1.8*0.9*1.2 | 670 kg |
| MK-1000 | 75 kW | 5000 kg/h | 35 cm | 2.2*1.3*1.4 | 1500 kg |
| MK-1200 | 90 kW | 6000 kg/h | 40 cm | 2.4*1.4*1.5 | 2000 kg |
| MK-1500 | 110 kW | 8000 kg/h | 45 cm | 2.6*1.5*1.6 | 2500 kg |
For a small line a 7.5 kW or 30 kW crusher is normally enough. If your feed is already chips, you can often skip the crusher and run straight to the hammer mill, which trims cost and floor space. The wood chip pellet making machine line page looks at the chip-fed build in more detail.


04How Does the Sawdust Mixer Prepare Material for Pelletizing?
A mixer looks like a simple item and does two jobs that matter more than buyers expect: it evens out moisture through the batch, and it blends different feeds into one consistent stream for the press.
Vertical versus horizontal mixers at this scale
Vertical mixers are compact and cheap and suit small batches where floor space is tight. Horizontal mixers move material faster and mix more evenly in a shorter cycle, which matters when you are blending feeds of different density.
| Model | Type | Power | Capacity |
|---|---|---|---|
| KW-500 | vertical | 3 kW | 1000 kg/h |
| KW-1000 | vertical | 4 kW | 2000 kg/h |
| KW-250 | horizontal | 3 kW | 1000 kg/h |
| KW-500 | horizontal | 7.5 kW | 2000 kg/h |
| KW-1000 | horizontal | 11 kW | 4000 kg/h |
For batch blending at small scale, the belt mixers cover 150 to 1000 kg per batch, and the double-shaft paddle mixers handle 250 to 2000 kg per batch for tougher blends.
Batch size and blend uniformity basics
A mixer does not fix a moisture problem; it spreads it. If one part of the batch is at 8 percent and another at 16 percent, a mixer averages the two, and the press sees a moving target. Blend for consistency, then check the moisture on the mixed stream, not on the intake pile. Batch size should cover a short run of the press so the feed does not sit long enough to stratify again.
05 Which Pellet Mill Model Covers the 100-300 kg/h wood biomass pellet production line Band?
This is the item that sets the capacity, so it deserves the closest look.
Die hole diameters for fuel pellets
Our flat die range presses 4-6 mm on the smaller frames and up to 12 mm on the largest, so a 6 mm fuel die is a standard option in the band you need. Die hole size sets the pellet you sell; the 30 kW frame spans 4-8 mm, which covers both small fuel pellets and larger ones for bigger boilers.
Flat die vs ring die at small scale
| Model | Capacity | Power | Pellet size | Weight | Dimension |
|---|---|---|---|---|---|
| RKL-250 | 100-200 kg/h | 15 kW | 4-6 mm | 0.5 t | 1400*600*1000 |
| RKL-300 | 150-250 kg/h | 22 kW | 4-6 mm | 0.65 t | 1780*670*1000 |
| RKL-350 | 100-300 kg/h | 30 kW | 4-8 mm | 0.76 t | 1860*670*1600 |
| RKL-400 | 300-600 kg/h | 37 kW | 4.5-10 mm | 2.2 t | 1900*850*1750 |
| RKL-450 | 500-800 kg/h | 55 kW | 4.5-10 mm | 4.3 t | 2300*1100*1900 |
| RKL-550 | 1000-1500 kg/h | 90 kW | 4.5-12 mm | 5.5 t | 2350*1100*2050 |
Flat die presses suit small and medium batches, are simple to change over, and are easy to keep running with basic skills. Ring die machines are built for continuous, heavier duty and higher output, which is more machine than a line in this band needs. At this scale the flat die press is the practical choice, and the small biomass pellet machine line page shows how it fits into a small turnkey build.
Tell us your throughput target and pellet diameter and we will confirm which press in the range holds it.


06What Can a Dust Collector Do for a small wood pellet production line?
Item five is the one we cannot quote from our own catalogue. A dust collector is not one of our machines, so we will not invent a model number or a fan rating for it. What we can do is explain why it belongs on your list and how we handle it.
Why dust control matters on a small line
Grinding and pelleting both throw off fine dust. Left uncontrolled, that dust settles on motors and control panels, where it insulates and eventually causes heat faults, and it hangs in the air near the bagging station where operators work. A collector pulls the fines out at the source, keeps the working area clean and reduces the load on the press's own ventilation.
How we handle a non-catalogue item
For the dust collector we specify the duty in the offer, size it to your airflow and integrate it into the layout, and the unit itself is confirmed as a project item. That keeps the line drawing complete without putting a machine in the quotation that we do not actually make. Give us the enclosed volume and the number of pickup points and we will define the duty for a supplier to meet.
07 How Does the Pellet Cooling Bin Bring Hot Pellets Down to Bagging Temperature?
Pellets leave the die hot and soft. If they go straight into a bag they sweat, soften and crumble, so the cooling stage is not optional on a line that sells its output.
Counterflow coolers and horizontal coolers compared
Two families cover this duty. Horizontal coolers are compact and suit smaller lines; counterflow coolers pass air against the pellet flow and cool more evenly, which suits higher rates.
| Model | Power | Fan | Capacity | Dimension (mm) |
|---|---|---|---|---|
| GMC-LQSF50 | 0.75 kW | 2.2 kW | 250-350 kg/h | 1050*630*730 |
| GMC-LQSF70 | 2.2*2 kW | 0.75 kW | 300-500 kg/h | 1100*1000*730 |


For higher rates the counterflow range steps up from 1-2 t/h to 12-20 t/h, and the cooling and screening units cover 400-600 kg/h and 800-1000 kg/h.
Matching cooler capacity to 100-300 kg/h
At your band, a horizontal cooler in the 250-350 kg/h class sits right on the press output, with the 400-600 kg/h unit as the headroom option. Cooling a little above rate is cheaper than cooling below it, because an under-sized cooler forces the press to slow down. The cooler also holds the pellets long enough for the surface to harden, which is where lasting durability is won.
08 Which Bagging Machine with Scale and Bag Sealer Close the small wood pellet maker production line?
The last two working items turn pellets into a product you can sell.
Weighing Range and Bag Speed of the Packing Machine
| Model | Power | Weighing range | Bagging speed | Packaging capacity |
|---|---|---|---|---|
| DCS-Z-W-50 | 3 kW | 10-50 kg | 260-300 bags/h | 200-300 bags/h |
| Accuracy | Power supply | Air supply | Air consumption | Dimension |
|---|---|---|---|---|
| static +/-0.1%, dynamic +/-0.2% | 380V 50Hz, 4.5 kW | instrument air 0.6-0.8 MPa | 0.2 Nm3/min | 1200*1200*2400 mm |
The automatic packing machine covers 10-50 kg, so it handles retail bags and heavier ones on the same machine, and its rate is far above what a 100-300 kg/h press can need. The unit pairs an automatic weighing device with a conveying device, a sewing device and computer control, so weighing and filling are handled together.


Sewing versus heat sealing at the bagger
The bagger's standard closure is a sewing device, which suits woven and paper bags and holds well in transport. A separate heat sealer for plastic bags is not one of our catalogue machines, so if you need heat-sealed plastic we confirm the closure as a project item alongside the bagger. Tell us your bag material and weight and we will specify the right closing method. Ask for the nine-item checklist turned into a quote and we will price the scope you actually need.
09How Does the Working Principle of a Flat Die Pellet Line Suit Small Batches?
A flat die press is a simple machine doing a demanding job, and that simplicity is exactly why it suits small lines.
Mechanical-to-thermal densification step by step
Rollers run over a flat, perforated die. Feed drops into the chamber and is forced through the holes, and the friction of that squeeze raises the temperature until the wood's natural lignin softens and flows. As the pellet exits and cools, the lignin sets and binds the fibres. No glue, no steam plant, no external heat source: the press makes its own.
What 110-130 kg/m3 loose feed becomes after pelleting
Loose sawdust and chips sit at a low bulk density, so a truck or a shed full of them carries mostly air. Pelleting compresses that loose material into a dense, free-flowing pellet, so the same volume holds far more fuel and the same truck carries far more energy. The exact bulk-density figures for your mix are indicative only and are confirmed at trial, because they move with moisture, species and die configuration. What does not move is the direction: densification turns a handling problem into a saleable product, which is the whole point of a small line. For a sawdust-fed build, the small sawdust biomass pellet production line page follows the same principle.
10What Raw Materials and Application Scenarios Fit a small sawdust pellet production line in Serbia?
A 100-300 kg/h small straw pellet making production line suits a working farm, a small sawmill or a local fuel trader, and Serbia has plenty of each serving a wood-heating market.
Reference: IEA Bioenergy programme
Sawdust, chips, straw and husk feeds
The line presses sawdust and chips from softwood and hardwood, and with the right grind it also handles straw and rice husk. The press does not care much about species; it cares about moisture and grind size. Feed in the 10-15 percent moisture band presses well, and oversize pieces must be milled down before the die.
Local fuel markets a 100-300 kg/h line can serve
At 200 kg/h a line fills a 15 kg bag roughly every four to five minutes while running, which is enough to supply local households, small boilers and a farm's own heating. In a wood-heating country that is a real market, not a hobby. The wider biomass pellet plant page covers how a small line scales into a regional supply business, and the small complete wood pellet plant page looks at a larger single-installation option.
11What Advantages Does a Compact 100-300 kg/h small wood fuel pellet making production line Offer First-Time Producers?
For someone building a first line, the compact scale is an advantage in itself.
Entry risk stays low, because a small turnkey set costs less to buy, less to power and less to staff than a plant-scale line, so a first producer learns the process without a heavy commitment.
Staffing is light as well. With a single press and short conveyor runs, one person can feed, monitor and bag, which keeps the wage bill to one shift.
Changeover is quick too, since a flat die press changes dies fast, so you can switch pellet size or feed without a long stop.
Local sales fit is the last gain: at this scale you can sell into your own region, keep transport short and set the price against local demand.
The pellet production line for biomass page rounds out how this scale fits the broader biomass market.
12Customer Requirements Addressed: The Serbia (Cicevac) Nine-Item Inquiry, Confirmed Line by Line
Here is your inquiry answered item by item, so nothing in the set is left to assumption.
- PKL 300 and PKL 350: these codes are not from our range. The machine that covers 100-300 kg/h is our 30 kW flat die press, with a 4-8 mm pellet size. The 22 kW frame at 150-250 kg/h covers a steadier 200 kg/h target.
- Wood crusher: our wood crusher range, with the 7.5 kW unit at 600-1000 kg/h the usual pick for a small line.
- Wood chip mill: our hammer mill range, the 7.5 kW unit at 250-500 kg/h covering the top of your band.
- Sawdust mixer: a vertical or horizontal mixer at 1000-2000 kg/h, or a batch mixer for smaller blends.
- Pellet mill: the 30 kW flat die press at 100-300 kg/h.
- Dust collector: not a catalogue machine with us; specified as a project item and integrated into the layout.
- Pellet cooling bin: horizontal cooler in the 250-350 kg/h class, or a cooling and screening unit at 400-600 kg/h.
- Bagging machine with scale: the automatic packing machine covers 10-50 kg at 260-300 bags/h, static accuracy +/-0.1%.
- Bag sealer: the bagger's standard closure is a sewing device; a separate heat sealer is confirmed as a project item.
On installation in Cicevac (37210) and the local power supply, see the section below.
13How Are Installation, Commissioning and 380V/50Hz Power Readiness Handled in Serbia?
Serbia runs a 380V 50Hz supply, which matches the standard configuration of these machines, so the electrical side is straightforward as long as the site is prepared before the line arrives.
Site preparation checklist before machines ship
We send a checklist covering the incoming supply and breaker sizes, the foundation pads for the press and crusher, the compressed-air line for the bagger, and the material flow through the building from intake to finished pallets. Confirming these before shipping removes most of the delays that slow an overseas install.
Remote guidance versus on-site commissioning
For a small line, remote guidance over video is usually enough: we walk your electrician through alignment, wiring checks, dry runs and the first production run. Where the site prefers it, on-site commissioning can be arranged, and we will say which route fits your build when we quote. Videos and photos of the building help us plan the flow before the first crate is packed. Send us a plan of your building and we will fit the layout to it.
14FAQ: Warranty, Spare Parts, EXW/FOB/CIF Delivery and Ordering the Small-Scale Line
Q1: What delivery terms can you quote? A: We quote itemised on an EXW or FOB basis, and can price CIF once we have your destination port. No list prices are published.
Q2: How long until the small-scale line ships? A: The schedule is fixed with the offer and depends on the final scope. A standard set without project items moves faster; adding a dust collector or a specific closure extends it.
Q3: How long is the warranty, and what does it cover? A: Warranty terms are set out in the offer and cover the machines we supply. Wear items such as dies, rollers and screens are consumables and are listed separately.
Q4: Which spare parts should a first-time owner stock? A: Start with a spare die and a set of rollers for the press, plus screens for the mill and drive belts. These are the parts that stop production when they wear out.
Q5: Can the plant run on the local Serbian supply? A: Yes. The line is configured for 380V 50Hz at order, which matches the standard supply in Serbia. Confirm your breaker and cable capacity on the site checklist.
Q6: Do you help with layout and installation? A: We provide a layout drawing and a site checklist, and support commissioning by video or on site. Send a photo or plan of the building and we will plan the material flow.



Hot Tags: 100-300 kg/h Small-Scale Wood Pellet Production Line, China 100-300 kg/h Small-Scale Wood Pellet Production Line manufacturers, suppliers, factory, pellet line for wood pellets, pellet line for sawdust, pellet machine line, wood pellet production high efficiency, wood pellet making line, Mobile Pellet Plant Unit
You Might Also Like
Send Inquiry




