Products

Home Products Wood Pellet Mill Wood Pellet Machine Details

Wood Chip Fuel Automatic Pellet Machine

The pellet fuel produced by the fuel pellet machine is very resistant to burning.

Send Inquiry

Features

Products Description

Biomass fuel pellet machine can process straw, rice straw, sawdust, wood chips, cattle and sheep feces, cloth and other materials into fuel pellets. Fuel pellets are used to replace coal. Since fuel pellets have many uses, fuel pellet machines are also used to make pellets. However, what should be paid attention to when using a fuel pellet machine? This is especially important for novices.

Product Parameters

Model	Capacity	Power	Dimensions	Weight
MK-250	100-200kg/h	15kw	11204401060mm	400kg
MK-300	200-300kg/h	22kw	12805601220mm	700kg
MK-350	300-400kg/h	30kw	13006001250mm	800kg

Product Analysis

1. Pay attention to the startup process: start the pellet host without load → oil pump → discharge → add oil and mix → start the conveyor → start the dust removal fan.
2. Shutdown process: turn off the conveyor → add oil and mix → squeeze the bin empty → turn off the host again → oil pump → discharge → dust removal.
3. If there is a deadlock during production, turn off the emergency stop button in time.
4. Pay attention to the grid voltage of 380v±10%, and there must be no phase loss, otherwise the motor will be burned and the warranty will not be provided.
5. Pay attention to the oil volume of the oil pump, the unobstructed oil circuit, the oil condition in the reducer and the replacement cycle.

1. During the operation of the biomass pellet machine, pay close attention to the feeding situation. Maintain a uniform feeding speed to avoid uneven equipment load caused by too fast or too slow feeding.
2. Regularly check the equipment's temperature, pressure, current and other parameters to ensure that they are within the normal range. If any abnormality is found, stop the machine immediately for inspection and troubleshooting.
3. Pay attention to the discharge situation to ensure that the quality of the pellets meets the requirements. If the pellet quality is found to be poor, adjust the equipment parameters or replace the worn parts in time.