Products

Home Products Wood Pellet Mill Wood Pellet Machine Details

Waste Wood Pellet Fuel Production Machine

Waste Wood Pellet Fuel Production Machine

The pellet fuel production machine is a good helper for you to produce pellet fuel.

Send Inquiry

Features

Products Description

Biomass pellet machines can convert biomass energy into electricity in our daily lives, steam and heat in industrial production, and greatly reduce coal burning and environmental pollution at the same emission volume. Not only that, in the harvest season, the cost of crop straw is almost negligible, and the people are happy to dispose of these crop wastes without violating the law. The only investment required is the transportation cost. Therefore, in recent years, biomass fuels have been vigorously promoted. This move not only reduces environmental pollution but also helps energy conservation and emission reduction. Biomass energy, like light energy, wind energy, and tidal energy, is a renewable resource in a certain sense. Compared with coal, although the calorific value is not as good as coal, the emission of harmful gases is much lower than coal. The promotion and use of biomass fuels will definitely be a good choice for agricultural waste treatment.

Product Parameters

Model	Capacity	Power	Dimensions	Weight
MK-250	100-200kg/h	15kw	11204401060mm	400kg
MK-300	200-300kg/h	22kw	12805601220mm	700kg
MK-350	300-400kg/h	30kw	13006001250mm	800kg
MK-400	400-600kg/h	37kw	13906501290mm	1000kg
MK450	600-800kg/h	45kw	16207001600mm	1500kg

Product Analysis

Working principle of wood pellet machine: First of all, this machine adopts the direct connection of motor. The motor is connected to the gear shaft through the gear coupling. After the reducer changes direction by 90°, the horizontal motor drives the vertical hollow spindle, and the spindle drives the pressing wheel to roll the inner surface of the mold to complete the pressing process.
During operation, the material falls vertically from the feed port of the wood pellet machine to the upper surface of the frame plate. After the rotation of the frame plate, the material is continuously and evenly distributed on the inner surface of the mold cavity (the contact surface between the pressing wheel and the mold). Under the rolling of the pressing wheel, the powdered material passes through the holes of the mold (through holes evenly distributed on the inner surface of the mold). In this process, the material is subjected to high pressure and high temperature, resulting in physical changes or appropriate chemical changes (depending on the material), which prompts the powdered material to form a cylindrical solid body that continues to lengthen. This cylindrical solid body continues to stretch until it is cut off by the cutter evenly distributed around the mold to form particles of a certain specification; the particles scattered around the wood pellet machine mold are concentrated to the discharge port by the material-pickling teeth, and the particles automatically fall down under the action of gravity, and the pressing process of the particles is completed.

1. The wood chip pellet machine adopts vertical feeding method, and the material is directly in place.
2. The wood chip pellet machine mold is stationary, the pressure wheel rotates, the material is centrifugal, and evenly distributed around.
3. The mold has two layers, upper and lower, which can reduce costs and increase efficiency; it can also be used in both ways, high production and energy saving.
4. The ring mold and vertical structure are conducive to heat dissipation and cooling in the pelletizing chamber.
5 The wood chip pellet machine adopts an independent frequency conversion discharging device to effectively ensure the pellet forming rate.