Products
Rice Husk Biomass Fuel Pellet Production Machine
The biomass fuel pellet machine is simple to operate and easy to use.
Features
Products Description
Noise, severe vibration
Cause of failure:
1. The bearing is damaged
2. The ring die roller is seriously worn
3. The gap between the ring die and the roller is too small
4. There are foreign objects in the conditioner or feeder
5. The main shaft bearing is too loose.
Repair method:
1. Replace the bearing
2. Replace the die roller
3. Appropriately increase the gap between the die roller
4. Clean up foreign objects
5. Tighten the nut to reduce the clearance
Product Parameters
| Model | Capacity | Power | Dimensions | Weight |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm | 400kg |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm | 700kg |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm | 800kg |
Product Analysis
The load of the pellet machine main engine fluctuates unreasonably or the pellet quality is uneven
Cause of failure:
1. Insufficient steam supply or pressure changes in the steam pipe
2. Unstable raw material transportation
3. Wear of the deflector scraper causes uneven feeding
Repair method:
1. Check the steam pipeline
2. Adjust the feeding speed
3. Replace the deflector scraper
The pellet mill stops during operation
Cause of the fault:
1. The tension of the V-belt is insufficient, causing the speed controller to operate
2. The parameters of the speed control instrument are set unreasonably
3. Part or all of the V-belt is severely worn or broken
4. Due to overload or impurities stuck between the pressure roller and the ring die, the main shaft rotates and the travel switch falls off.
5. The pressure of the clamp is insufficient, or the gate disc is greased and slips, causing the main shaft to rotate and the travel switch to disengage
6. Line fault
Maintenance method:
1. Re-adjust the tension of the V-belt or check the pressure value on the hydraulic system pressure gauge. If necessary, reset its pressure value (be careful when adjusting)
2. Reset its parameters
3. Install a new set of V-belts, and do not replace only part of them
4. Reset the main shaft and travel switch
5. Reset the clamp oil pressure or clean the gate disc
6. Check the circuit
Qualifications and Honors
Customer visit
Hot Tags: rice husk biomass fuel pellet production machine, China rice husk biomass fuel pellet production machine manufacturers, suppliers, factory, vertical ring die pellet mill, wood pellet production system, pelletizer for biomass pellets, pellet mill for biomass, wood pellet mills for home use, pelletizer for wood pellet safety
You Might Also Like
Send Inquiry
