Diesel Flat Die Wood Pellet Mill

First of all, it is necessary to regularly inject lubricating oil into the fuel pellet machine, so as to reduce the friction of the bearing and thus reduce the friction heat. When the pellet machine is not lubricated for a long time, the lack of oil in the bearing will increase the friction of the bearing, which will cause the temperature to rise.
Secondly, we can also provide rest time for the equipment. It is best not to use the pellet machine for more than 20 hours.
Finally, the ambient temperature will also have a certain degree of influence on the bearing. If the weather is very hot, the working time of the pellet machine should be appropriately reduced.
When we use the biomass fuel pellet machine, if the temperature of the bearing is too high, we should shut down the machine, which is also a maintenance measure for the pellet machine

The pellet fuel produced by the biomass fuel pellet machine is a new type of bioenergy. It is small in size, easy to store and transport, has high calorific value, is resistant to combustion, burns fully, will not corrode the boiler during combustion, and will not produce gases harmful to the environment. The ashes after combustion can be used as organic fertilizer to restore arable land. Its main uses are: civil heating and life energy. It can replace firewood, raw coal, fuel oil, liquefied gas, etc., and is widely used in heating, domestic stoves, hot water boilers, industrial boilers, biomass power plants, etc.