Bamboo Pellet Machine

The rice husk pellet mill must be pulverized when it is used for the second time. The holes are astringent and require oil lubrication. The grinding material is configured in the ratio of 5:2. Mix the bran and sawdust with the used engine oil and set aside.

And users should pay attention to the fact that during the granulation process of the wood pellet mill, it is forbidden to idle the pressure wheel and the grinding disk for a long time and add materials without interruption. If the pelletizing does not pelletize, check whether the mold is blocked, such as blocking. Open it hole by hole and put the abrasive into it. After repeated squeezing, pelletize the material again.

Users should regularly check the tightness of the screws, biomass pellet mill, pressure roller bearings, spindle bearings whether oil shortage. If the biomass pellet mill encounters strange noise during operation, it should be shut down immediately, check whether there is any foreign matter, clean it up and then start the machine again.

Small wood pellet mill

The fuel pellets made are too crumbly and not molded, what is the cause of this? And how to solve it?
First, the pressure is not enough:
Fuel pellet machine used for a long time, may lead to insufficient pressure, thus causing, the extruded fuel pellets, fluffy, broken, this time, do not panic. We can check the pressure gauge, if the pressure is not enough, we can solve it by adjusting the pressure control valve.
Second, the degree of sealing:
The sealing of the valve and plug will also affect the degree of pellet molding. If, the gasket is damaged, or loose. We will press it tightly, or replace it, can be solved, fuel pellet machine due to the sealing degree problem, caused by the pellets are not molded.
Third, mold cleanliness:
Fuel pellet machine also needs maintenance. If the pellet machine is used for a long time, and do not pay attention to maintenance, will also affect, the molding degree of fuel pellets. At this time, we need to clean the mold, so that the pellet machine's discharging unshaped is solved.
Of course, reasonable maintenance is good for all aspects of the fuel pellet machine.

Pellet maker for wood stove

Principle of manufacturing fuel pellet mill:
1, the grain to be processed is put into the hopper (the height of the inlet can be adjusted according to the different materials), and the materials are sent to the crushing room for crushing through the screw feeding device;
2,After crushing, the material enters the air-selecting room for air-selecting to remove the impurities;
3, the screened powder is transported by the air conveying system to the screening equipment for screening, to get different particle size of the powder products (general diameter of 0.5-3mm);
4,The screened powder is transported by the airflow conveying system to the screening equipment for sieving, and the powdered products with different particle sizes are obtained (the general diameter is 0.5-3mm).

Hot Tags: bamboo pellet machine, China bamboo pellet machine manufacturers, suppliers, factory, charcoal processing machine, biomass charcoal making machine, bamboo pellet machine, wood pellet equipments, biomass pellet manufacturing plant, wood pellet grinding machine