Rice Straw Pellet Making Machine

Small pellet mill machine

Start-up steps: After the test run is normal, the machine can be started formally. When starting the machine, you should pay attention to the order of starting the machine. The order should be from bottom to top. The steps are as follows:
1. Make inspection preparations according to the test run steps.
2. Adjust the steam pressure and release the condensed water in the steam pipe.
3. Start the main motor of the pellet machine
4. Start the conditioner motor
5. Start the feeder motor and adjust the feeder to the lowest speed.
6. Open the discharge door and the steam inlet valve at the same time, slightly adjust the feeder motor speed, and after the material is pressed out, gradually adjust the feeder speed and steam addition to the appropriate level.
7. Adjust the cutter to make the pellet length appropriate.
8. Further adjust the feeder speed so that the working current reaches the rated current value, and adjust the steam flow accordingly to make the temperature and humidity appropriate.

Stove pellet making machine

Small pellet plant
During the use of wood pellet machine, there will always be various problems in wood pellet machine, which will lead to reduced production efficiency and even shorten the service life of wood pellet machine. Most of the failures of wood pellet machine are caused by operation. Therefore, the company summarizes the following methods of using wood pellet machine for customers, hoping to help everyone.
Uniform feeding. Try to make the equipment run at a uniform speed to ensure the consistency of particle size, make the pellet machine pelletizing smoother, and reduce equipment loss.
Selection of template. It is mainly the selection of template aperture - too small aperture can lead to no discharge and low output. When choosing a mold, choose the aperture size according to the advice of professional sales and technical personnel to achieve the ideal production capacity.

Vertical ring die pellet mill

Small wood pellet maker
Reasonable gap between template and press wheel. The size of the gap affects the density of wood pellets and pellet output.
In addition, keeping the wood pellet machine clean, regularly changing and adding lubricants can improve the service life and production efficiency of the equipment. Doing these simple daily operations well can improve the service life and production efficiency of the equipment and create more profits for the bosses.
Stop feeding before stopping the pellet machine. After the material in the silo is processed, add soil and oil to press into the template hole to keep the hole lubricated so that there will be no blockage next time it is used.

Qualifications and Honors

Hot Tags: rice straw pellet making machine, China rice straw pellet making machine manufacturers, suppliers, factory, biomass pellet manufacturing packaging, biomass pellet press for safety, wood pellet manufacturing storage, biomass pellet making machine, pellet production line for wood pellet safety, biomass pellet manufacturing quality control