Wood Fuel Ring Die Pellet Machine

(1) When there are bright spots on the working surface of the clamp and wear marks on the working surface of the transmission wheel, the clamp inner card has been worn or deformed, causing the ring die to crack.
Solution: The clamp must be replaced in time.
(2) Due to the wear of the mating surface of the transmission wheel, the mating surface of the die and roller is obviously loose, causing the ring die to crack.
Solution: The transmission wheel must be replaced or repaired in time, or the tolerance of the mating size of the ring die assembly surface must be increased.
(3) The ring die is cracked due to wear or deformation of the die bushing.
Solution: The die bushing must be checked and replaced in time.
(4) The ring die is knocked open due to wear of the transmission key. It is also related to the looseness of the transmission wheel. Regularly measure the gap between the key and the keyway and replace the transmission key in time.

Maintenance and care of pellet machine ring die
1. Regularly check the wear of the pellet machine ring die and replace it in time according to the situation.
2. During the production process, ensure the quality of the material and try to avoid wear on the ring die.
3. Keep the pellet machine clean to avoid secondary damage to the ring die caused by dust and impurities.
The wear of the pellet machine ring die is a very common problem, but repair methods can effectively extend the service life and reduce production costs. When using the pellet machine, users should regularly check and maintain the ring die to reduce wear.