Products

Home Products Ring Die Wood Pellet Machine Details

Fully Automatic Ring Die Fuel Pellet Machine

Fully Automatic Ring Die Fuel Pellet Machine

The fully automatic ring die fuel pellet machine can produce pellet fuel fully automatically.

Send Inquiry

Features

Products Description

Before disassembling the roller, you first need to prepare the corresponding tools, including wrenches, electric drills, torque wrenches, universal wrenches, etc.
1. First, lock the lifting device to ensure that the roller is in a stable state.
2. Then use a wrench or electric drill to remove the bearings and bolts at both ends of the roller.
3. After removing the roller, check whether there are pits or wear on the surface of the roller. If there is a problem, it needs to be repaired or replaced.

Product Parameters

Model	Power	Dimensions
MK-250	15kw	11204401060mm
MK-300	22kw	12805601220mm
MK-350	30kw	13006001250mm

Product Analysis

1. Install the new roller in the original direction and position, and make sure the bearings and bolts at both ends of the roller are installed in place.
2. Use a torque wrench or a universal wrench to tighten the bolts on the wheel cover in sequence, and pay attention to the uniform force of the bolts to prevent the roller from being unstable.

Precautions
1. When disassembling and installing the roller, the power supply must be cut off and all power mechanical parts must be stopped to ensure the safety of operation.
2. When disassembling and installing, the corresponding tools and methods must be used correctly and the safety operating procedures must be strictly followed to ensure the accuracy and safety of the operation.
3. After installing the new roller, testing and inspection are required to ensure the normality and stability of the operation.
After the above steps, you can easily complete the disassembly and installation of the roller. During the actual operation, if you encounter any problems, be sure to stop the operation in time and seek professional technical support.