Products

Home Products Ring Die Wood Pellet Machine Details

Fuel Automatic Ring Die Pellet Machine

The ring die fuel pellet machine is simple to operate and easy to use.

Send Inquiry

Features

Products Description

Detailed explanation of the disassembly method of the pellet mill roller
Preparatory work
1. Stop using the pellet mill and ensure that all power supplies and power components are powered off and turned off.
2. Arrange and clean the roller and place it on a horizontal surface.
3. Prepare necessary tools such as open-end wrenches, rubber hammers, turnover drums, etc.

Product Parameters

Model	Capacity	Power	Dimensions
MK-250	100-200kg/h	15kw	11204401060mm
MK-300	200-300kg/h	22kw	12805601220mm
MK-350	300-400kg/h	30kw	13006001250mm

Product Analysis

Detailed disassembly steps
1. Use an open-end wrench to gently remove the nuts at both ends and place the bolts and nuts separately.
2. Use a rubber hammer to gently tap the roller to separate it from the shaft.
3. Remove the roller from the shaft and place it in a dry and clean place.
4. Clean the journal part of the roller and the shaft, and lubricate them with lubricating oil.
5. Check whether the surface of the roller and the surface of the shaft are flat. If damaged, replace them in time.

Notes
1. Handle with care when disassembling to prevent accidental injury to personnel and damage to the machine.
2. Use appropriate detergent when cleaning the roller to avoid damage to the surface of the machine.
3. Use appropriate lubricant when lubricating, and replace grease regularly as needed.
4. After all disassembly is completed, assembly and debugging should be carried out to ensure that all parts are correct before starting the equipment.