How to Adjus if the Wood Chip Fuel Pellet Machine is experiencing temperature anomalies?
Causes of abnormal temperature
First, learn to identify the two core scenarios of abnormal temperature on a Biomass Pellet Machine. The first is: Temperature too low. Typical symptoms include loose, easily crumbled particles with noticeable cracks, and a forming rate below 85%. In this case, first check if the raw material moisture content is within the acceptable range (12%-15%). If the moisture content is normal, the problem is insufficient temperature causing inadequate softening of the lignin.
The second is: Temperature too high. Typical symptoms include a blackened particle surface, carbonization marks, even a burnt smell, and excessive smoke during combustion. High temperatures not only affect pellet quality but also accelerate mold wear in wood pellet manufacturing equipment, shortening equipment lifespan.


Another special case involves large temperature fluctuations, leading to inconsistent pellet quality. This could be due to a malfunction in the equipment's heating system or an unstable feeding rate. First, check the heating system to ensure the heating elements are functioning correctly and the temperature sensor is working properly. If the equipment is functioning correctly, stabilize the feeding rate to avoid temperature fluctuations in the pressing chamber caused by inconsistent feeding.
Solution
1.Adjustment method: Increase the temperature by 5°C at a time, processing for 10 minutes after each adjustment, observing the particle forming until the particle surface is smooth and the hardness is moderate. Avoid drastic temperature increases at once, such as jumping directly from 70°C to 95°C, as this will cause excessive temperature fluctuations and negatively impact forming. For example, when a user was processing sawdust, the particles were loose and cracked. After confirming the raw material moisture content was within the acceptable range of 14%, the temperature was gradually increased from 75°C to 85°C, and the forming rate recovered to 94%.
2.In such cases, immediately lower the temperature by 5-8°C at a time, while simultaneously cleaning any residual carbonized material from the pressing chamber to prevent contamination of subsequent raw materials. If the pellets become loose after lowering the temperature, the temperature drop is too large; increase the temperature by another 3°C to find the equilibrium point. For example, a user processed at 110°C, resulting in severe pellet carbonization; lowering the temperature to 85°C resolved the carbonization issue, and the pellets achieved the required quality.


3.Adjustment techniques: Install a variable frequency feeding device to maintain uniform feeding; simultaneously set the temperature within a suitable midpoint range, such as 80°C for cork processing, with fluctuations controlled within ±3°C to ensure stable pellet quality. Key Reminder: After adjusting the temperature, observe the current change of the Commercial Pellet making machine. If the current suddenly increases, it indicates that the temperature is too high, causing the raw material to stick together and increasing the equipment load; the temperature needs to be lowered immediately. If the current is too low, it indicates that the temperature is insufficient, the raw material has not softened sufficiently, and the pressing resistance is low; the temperature needs to be increased appropriately. By combining temperature adjustment, molding observation, and current monitoring, molding problems caused by abnormal temperatures can be quickly resolved.
about us
Customer visit

Certificate of Honor

FAQ
1.What is the price of equipment for the Best electric wood pellet mill?
It costs approximately US$1,500.00 - 25,000.00
2. If equipments have some quality problem, how would you deal with?
We will responsible for all the quality problems. Change all the parts for free.

