Knowledge

Biomass pellet machine operation guide

Operation process of biomass pellet machine
1. Raw material selection: Select biomass raw materials with a certain density and water content, such as straw, sawdust, etc.
2. Equipment installation and commissioning: Install the biomass pellet machine according to the instructions, commission each component, and ensure normal operation.
3. Operation skills:
(1) Control the feed speed to avoid equipment blockage due to too fast or too slow feed.
(2) Add lubricating oil regularly to ensure normal operation of the equipment.
(3) The particle size should be adjusted according to specific needs to avoid waste and poor production quality.
(4) When the biomass pellet machine has an abnormal situation, it is necessary to stop the equipment immediately for investigation.

 

wood pellet mill

 

Model Capacity Power Dimensions
MK-250 100-200kg/h 15kw 1120*440*1060mm
MK-300 200-300kg/h 22kw 1280*560*1220mm
MK-350 300-400kg/h 30kw 1300*600*1250mm
MK-400 400-600kg/h 37kw 1390*650*1290mm
MK450 600-800kg/h 45kw 1620*700*1600mm


4. Making pellet fuel: Feed the processed biomass raw materials into the biomass pellet machine and extrude them through the die orifice.
Solutions to common problems
1. What should I do if the equipment is blocked? Stop the equipment in time, disassemble and clean it, and check whether it is caused by the raw materials being too large or the water content being too high.
2. What if the pellet fuel is too loose? Increase the pressure and adjust the die orifice to avoid hollowness.
3. What if the particle size of the pellet fuel is different? Adjust the die orifice and the time the raw materials have passed to ensure uniform particle size.
4. What if the equipment makes abnormal noises? Stop the equipment in time for inspection and check whether the equipment bearings and gears are normal.

You Might Also Like

Send Inquiry