Diesel Pellet Mill

Biomass pellet plant
The pellet machine is a device that processes raw materials into granular substances. It is mainly used in chemical, metallurgical, pharmaceutical, food and other industries to convert powdered or granular materials into pellets for easy storage, transportation and use.
1. High efficiency: The pellet machine adopts advanced pelletizing technology, which can quickly and evenly convert materials into pellets to improve production efficiency.
2. Adjustable particle size: The pellet machine can adjust the size of the pellets as needed to meet the requirements of different materials for particle size.
3. Stable product quality: During the pelletizing process of the pellet machine, the material is subject to uniform pressure and temperature control to ensure the stability of product quality.
4. Easy operation: The pellet machine adopts an automated control system, which is simple and convenient to operate, reducing the complexity of manual operation.

Biomass pellet grinder

Biomass chip pellet machine
How to use the pellet machine:
1. Preparation: Clean the pellet machine equipment to ensure that there are no impurities and contaminants.
2. Adjust parameters: Adjust the speed, temperature and other parameters of the pellet machine according to the characteristics and requirements of the material.
3. Feeding: Put the prepared material into the feed port of the pellet machine.
4. Pellet making process: Start the pellet machine, adjust the pellet making parameters, and start the pellet making process.
5. Collect pellets: After a period of pellet making, the pellets will come out from the discharge port and collect the pellets.
6. Cleaning equipment: After the pellet making is completed, clean the pellet machine equipment in time for the next use.

Biomass wood pellet mill

Biomass pellet press machine
When a new ring die is put into use, the feeder speed should be adjusted slowly. The feed rate cannot be increased before the ammeter pointer is stable. If the ring die is blocked, the material in the press chamber must be cleaned first, and then the pellet press main unit must be restarted. At this time, it cannot be started at the original set feed speed, and a lower feed speed should be used to put it into operation. Because the material in the pellet press ring die hole is tightly packed into the hole after cooling, additional pressure must be applied to allow the material to pass through the die hole. Subsequently, the feed rate and steam volume can be increased accordingly according to the specific situation of the ammeter.
Don't be careless and impatient when using a new ring die. It is necessary to let it heat up before it can achieve the best production capacity.

For ring dies with a die hole diameter equal to or greater than 4.5mm, excess steam should be used. Powders with high moisture content are easier to fill the die hole, but the pressed particles are too soft. This problem can be overcome by slowly adding dry materials until the feed becomes dry and hard. The addition of dry materials should not be too urgent or too fast, and the ring die should have enough time to heat up. If too much dry material is added, the die hole will be blocked.

Customer visit

Hot Tags: diesel pellet mill, China diesel pellet mill manufacturers, suppliers, factory, biomass pellet press, flat die wood pellet mill, Sawdust carbonization equipment, industrial wood pellet machine, pellet making line for pellet stove, pelheat mini pellet mill