Products
Small Charcoal Making Machine
The emergence of carbon powder extruder has alleviated the problem of insufficient quality of traditional fuel.
Features
Coal briquetting equipment
The safe operation, working principle and technical advantages of coal briquetting machine are discussed in detail
First of all, the operator must strictly follow the requirements of the technicians to stand in the designated safe area to work, and each operator must be familiar with the relevant operating instructions of the equipment.
The lubrication of the coal briquetting machine must be carefully considered. If this aspect is not done well or very poorly, it will cause the equipment to not work properly, thus affecting production.
Before formal production, a trial run must be carried out, and formal production can only be carried out when all aspects are operating normally.
The current and voltage must also meet the relevant requirements, and the coal feeding amount and moisture can be reasonably adjusted according to the current to ensure the formation of briquette.
It is strictly forbidden to stand in front of the machine head to avoid being hurt by the sprayed materials.
This point has actually been mentioned before, that is, it is strictly forbidden to use high-hardness materials to stir the materials during the production process. So as not to damage the machine body.
Charcoal making machine

| Model | Capacity | Roating speed | Power | Model size | Dimension(m) | Weight |
| MK-140 | 2-3(t/h) | 46-60(r/min) | 11KW | 30-40mm | 1.4*0.9*0.6 | 1.5t |
| MK-180 | 3-4(t/h) | 38-50(r/min) | 22KW | 30-60mm | 1.6*1.1*1.3 | 2.4t |
| MK-210 | 4-5(t/h) | 30-40(r/min) | 30-37KW | 30-80mm | 1.9*1.4*1.45 | 3.5t |
| MK-300 | 6-8(t/h) | 40-50(r/min) | 40-50KW | 30-100mm | 2.5*1.6*1.65 | 6t |
Sawdust Coal Press Machine
1. Carbonization first and then forming, reducing the original five processes to two.
2. The service life of wearing parts is increased from the original 40 hours to 4,000 hours.
3. The electricity cost is reduced by 60%.
4. The operation difficulty is reduced, one machine has two uses, saving time and effort.
5. Weak carbon becomes high-quality carbon, with the carbon content increased from 60% to about 90%.
6. The variety is increased, and there are more types. The main properties are; rod-shaped, spherical, flake-shaped, special-shaped blocks, etc.
Charcoal maker machine

Coal Ball Press Machine
Technical advantages of coal rod extruder
1. It adopts a hardened gear reducer with small size and high load-bearing capacity;
2. The internal impeller adopts a thickened blade design, and the impeller and the inner lining of the barrel are made of wear-resistant precision casting materials, which has a service life of 4-5 times longer than ordinary materials;
3. The head coal rod outlet is made of replaceable wear-resistant alloy steel, which is easy to replace;
4. The head and the barrel are hinged, which can be opened during maintenance, and it is very convenient to replace the internal impeller and barrel lining.
Qualifications and Honors

Hot Tags: small charcoal making machine, China small charcoal making machine manufacturers, suppliers, factory, small charcoal making machine, charcoal powder shaping maintenance, charcoal powder shaping factory, Charcoal Making Machines, charcoal powder extrusion installation, charcoal forming maintenance for powder
You Might Also Like
Send Inquiry




