Pulverized Coal Extruder

Activated carbon making machine Pick:
When purchasing a coal rod machine, it is important that the lower the price, the better the quality. However, the quality of a coal rod machine cannot be determined solely by the price. When some customers of coal rod machines purchase products, their first concern is to inquire about the price, and they rarely inquire about the performance of the machine. Some customers hang up the phone directly after inquiring about the price. Whether you buy a coal stick machine or not, performance is its soul. Before purchasing, you should ask about its power, mechanical principles, output and services. As the saying goes, shop around. If necessary, customers should also visit the manufacturer or construction site for inspection. You can also come to test the machine with raw materials to choose the one that suits you. models are available for purchase.

Bamboo charcoal making machine

Activated charcoal making machine Tips:
1. First of all, you must understand the performance and motor power of the coal stick machine. The startup should be based on production needs and should be started as little as possible. In addition, the timing of startup and feeding should be grasped, and the motors should be started in sequence to avoid starting the motors at the same time. When feeding, follow production procedures.
2. Don't be anxious when starting the machine. First, turn the belt pulley by hand, and then press it slightly to make the machine rotate first, and then press it a second time to start it officially. After the machine rotates, feed a small amount first, and then gradually increase the amount. A reasonable amount of material should be used to control the current, neither too large nor too small. Especially if you start suddenly after adding materials, it is easy to cause the current to run high, block the machine or burn out the motor.
3. The lighting used when making coal sticks should be installed separately and turned off in time when visibility is good during the day. They should not be left on all the time.
4 The operation must be careful and the machine head cannot be blocked. If the raw material blocks the eye of the machine head, the machine head must be disassembled, cleaned and reassembled.

Charcoal machine

Straw charcoal machine notes:
1. Starting the coal rod machine quickly or under load also wastes electricity. According to calculations, the electricity consumption during rapid startup is more than 6 to 7 times that during operation.
2. The coal rod machine is very sensitive to a small amount of iron and other hard objects. In mild cases, it can block the eye of the machine head and increase the current; in severe cases, it will not only damage the bearings and gearbox, but also burn out the motor.
3. The coal rod post is very dusty and accumulates a lot of dust. After using the motor and distribution cabinet for a period of time, the accumulated dust should be checked and removed. Before starting the machine each time, check the motor terminals and check whether the wires and power supply are normal.
4. If you have any questions or needs, you can consult us at any time.We will serve you wholeheartedly.

Our team

Packaging and shipping

Hot Tags: pulverized coal extruder, China pulverized coal extruder manufacturers, suppliers, factory, Sawdust Coal Press Machine, charcoal powder shaping precision, extrusion speed for charcoal powder, charcoal forming importer for powder, charcoal powder shaping factory, charcoal forming warranty for powder