Carbon Powder Extruder Machine

Charcoal stick equipment explanation:
The coal rod extruder is a molding equipment that uses the spiral extrusion principle to compress the prepared pulverized coal into a cylindrical or plum blossom shape with a certain strength. The coal rod extruder is the main equipment in the fuel forming section of the system. It extrudes the fuel pulverized coal into coal rods with a certain strength (there are various shapes according to the requirements), which are used to replace lump coal and are fed into the gas production A new process for burning in furnaces. It can make full use of pulverized coal and reduce fuel costs.

Charcoal stick production machine

Charcoal rod extruder Features:
This machine uses a variable pitch impeller to forcefully push the pulverized coal at the rear of the barrel forward. After the volume of the pulverized coal is compressed in the barrel, it is extruded through the round hole in the front head to form a coal rod. The shape of the round hole is: There are many kinds, and there are many shapes of coal sticks. The coal rod is naturally broken due to gravity during the advancement process. This machine adopts a hard-tooth surface reducer, which is small in size and has high load-bearing capacity. The internal impeller adopts a thickened blade design. The impeller and the inner lining plate of the cylinder are made of wear-resistant precision casting materials. The service life is 4-5 times longer than ordinary materials; the coal rod outlet of the machine head is made of replaceable wear-resistant alloy steel. Easy to make and replace. The machine head and cylinder are hinged and can be opened during maintenance. It is very convenient to replace the internal impeller and cylinder lining.

Sawdust carbon rod machine

Charcoal stick production equipment maintenance:
1. The extruder needs to be cleaned, lubricated and inspected every day. Clean the surface of the equipment and the surrounding environment, and clean up the oil in every part in time. Appropriate amount of lubricating oil must be added to the lubricating parts in time to ensure that vibration will not cause the equipment to swing.
2. Weekly maintenance: Regularly check the operation of the extruder motor, and check circuit boards, pressure gauges, sensors and other equipment to ensure that the instrument indications are normal. Use high-pressure gas to purge circuits, switches, sensors and other places every week to keep the equipment dry and clean.
3. Regularly inspect all parts of the extruder, including the gear box, casing, wire plugs, etc., to maintain the good condition of the equipment and reduce failures and losses caused by long-term use.

4.Perform extensive maintenance and inspection on the extruder, such as replacing new lubricating oil and filters, replacing aging parts and seals, etc.

5. We are a production factory. If you have any questions, you can contact us. We will deliver the goods in time and provide you with wearing parts.We are here to serve you wholeheartedly.

Packaging and shipping

Customer visit

Hot Tags: carbon powder extruder machine, China carbon powder extruder machine manufacturers, suppliers, factory, charcoal forming factory for powder, charcoal powder shaping purchase, charcoal forming company for powder, extrusion application for charcoal powder, extrusion manufacturer for charcoal powder, charcoal powder extrusion precision