Products
Coal Powder Briquette Machine
Carbon Powder Extruder can make coal and charcoal powder into sticks. This is the first step to make silver charcoal.in the stick center, it can be made with a hole or not.
Features
Charcoal briquette machine
Charcoal making machine
Carbon Powder Extruder can make coal and charcoal powder into sticks. This is the first step to make silver charcoal.in the stick center, it can be made with a hole or not.The material naturally enters the mold on the pressure roller and is subjected to greater pressure as the two rollers rotate. When the material rotates to the line contact point of the two rolls, its pressure reaches its peak.
Small charcoal making machine is widely used in chemical industry, metallurgy and ceramic industry, etc.It is the ideal equipment for enterprises to improve production efficiency and reduce consumption.The final briquette can be used as fuel, BBQ, boiler and so on.
briquette extruder machine
Small charcoal making machine
1,Operating the coal bar extruder should be careful not to let the head be blocked. If the raw material will be blocked head eye, must unload the head to clean and then assembly.
2, to use the size of the amount of feed to control the current high and low, to grasp the quality.
3, to avoid overloaded operation or insufficient feed caused by idling. Due to feed or mechanical failure and other reasons, resulting in a long time to stop the material, it is best to stop the coal stick extruder. Because the coal bar extruder is usually 75kW, 1min to consume 1.25kw of electricity, and this electricity can be used for the coal bar extruder to produce 83kg of coal bars. Rush or load start the coal bar extruder is also a waste of electricity, according to estimates, the rapid start, electricity is running more than 6 to 7 times.
4, the coal bar extruder is very sensitive to a small amount of iron and other hard objects, light can be blocked head eye, so that the current rises; serious not only damage to the bearings and gearbox, but also burned out the motor.
5, the working environment of the coal stick extruder is dusty, more dust. The motor and distribution cabinet should be checked and cleared of dust after using for a period of time. Every time before starting the machine, check the motor terminal, check the wire, power supply is normal.
|
Model |
Capacity |
Roating speed |
|
140 |
2-3(t/h) |
46-60(r/min) |
|
180 |
3-4(t/h) |
38-50(r/min) |
Charcoal making machine
Coal stick forming machine is a coal stick molding equipment that uses the working principle of spiral extrusion to compress the modulated pulverized coal into a predetermined shape with a certain strength. Coal stick extruder adopts hardened gear reducer with small volume and high bearing capacity. Coal bar extruder adopts hardened gear reducer with small volume and high carrying capacity. The internal impeller of the coal stick machine adopts thickened blade design, and the impeller and the liner in the cylinder are made of wear-resistant fine casting material, with a life span of 4-5 times that of ordinary material; the coal stick outlet of the head is made of replaceable wear-resistant alloy steel, which is easy to replace. Environmentally friendly coal bar machine is a core equipment in the complete set of fuel molding section of ammonia fertilizer plant and gas plant gas production system, which is a new process of extruding the fuel pulverized coal into round (hexagonal or square) coal bar with certain strength, and then burning it in the gas furnace, replacing the traditional process of burning lump coal and briquettes for gas production.
Customer visits
Hot Tags: coal powder briquette machine, China coal powder briquette machine manufacturers, suppliers, factory, hardwood pellet maker, gasoline pellet mill, fuel rod extruder, sawdust pellet mill, Bamboo Powder Charcoal Furnace, biomass charcoal making machine
You Might Also Like
Send Inquiry
