Biomass Wood Pellet Production Line

Straw fuel (that is, biofuel) is the use of corn stalks, wheat straw, straw, peanut shells, corn cobs, cotton stalks, soybean stalks, weeds, branches, leaves, sawdust, bark and other solid wastes of crops as raw materials, after crushing, pressurizing, densifying, molding, into small rod-shaped solid particle fuel. Pellet fuel is made by using pressure rollers and ring dies to extrude wood chips, straw and other raw materials under normal temperature conditions. The density of raw materials is generally about 0.6-0.8, and the particle density after molding is greater than 1.1, which is extremely convenient for transportation and storage, and at the same time, its combustion performance is greatly improved, reducing human dependence on petrochemical energy and atmospheric emissions.

Complete wood pellet production line / pellet making machine price

(1) Raw material receiving process

(2) Wood chipping and grinding process

(3) Drying process

(4) Wood pelleting process

(5) Pellet cooling process

(6) Pellet screening process

(7) Packing -- finished wood pellet

1. Patented technical equipment , a variety of stand-alone machines, suitable for various materials, modular structure, optimized configuration, to ensure the wide applicability of the production line;

2. Intelligent control can be realized according to customer requirements, one-key 'fool' operation, automatic adjustment of operating parameters, the production line is always running in the best state, and the production line capacity and product quality are guaranteed;

3. More than 300 users around the world, with rich practice tests;

4. Compared with the traditional drying and granulating production line, the area is reduced by 50%, and the civil construction investment is reduced by about 50%.

5. The internal structure of the dryer adopts a variety of high-efficiency lifting device combination modes, which can effectively control the drying process and heat distribution. The heat utilization rate is high, and the exhaust gas discharge temperature is lower than 50 °C, ensuring the production line runs with low energy consumption.

6. The processing route adopts the mixing process of primary drying, secondary crushing, continuous feeding and regulating feeding. The molding rate of pellet fuel is over 98%, and the bulk density, particle density and calorific value are high. It can realize large-scale, continuous and stable production and meet the needs of the industrialization of biomass pellet fuel.

7. Unique process control technology to remove foreign ash content to meet customer's product ash content less than 1% requirements

8. Modular dust collection, dedusting, purification, heat recovery and utilization configuration, safe and environmentally friendly.

9. Equipped with a variety of new energy-saving hot blast stoves, which are efficient and energy-saving, controllable heating, simple to operate, reduce energy consumption by about 30%, reduce power consumption by 20%, and lower operating costs.

10. The Internet sharing system ensures the efficient distribution of personalized production lines, accessories and units.

Hot Tags: Biomass Wood Pellet Production Line, China Biomass Wood Pellet Production Line manufacturers, suppliers, factory, equipment to make wood pellets, charcoal briquette press, agro briquetting machine, wood stove pellet machine, sawdust briquette machine, fuel pellet making machine