Straw Pellet Machine

Diesel powered pellet mill
The fuel pellet machine uses wood residue, sawdust, husk, straw and other raw materials to produce and process biomass pellet fuel in a unique mechanical equipment. Biomass fuel has low ash, sulfur and nitrogen content. It is a clean, efficient, energy-saving and environmentally friendly renewable fuel that can indirectly replace coal, oil, electricity, gas and other power sources. After the biomass fuel straw fuel is fully burned, the residual slag base does not contain carbon, so the thermal damage base of incomplete combustion of solids is zero, while the thermal damage of incomplete combustion of raw coal is about 7~15%.
Sawdust pellet straw pellet fuel has many advantages. Compared with coal, it is relatively environmentally friendly and trouble-free. At the same time, the pellet machine also solves the problem of difficult combustion and treatment of rural waste straw.

Pellet briquette machine

Grass pellet maker
1. Main body: The body is a rectangular column, on which a closed bearing seat is installed to connect with the powder hopper. The powder hopper extends out of the body, and a V-shaped chassis is installed below it, which can be placed indoors at will.
2. Pellet making device: The rotating drum is placed horizontally under the powder hopper, with bearing supports at the front and back. It rotates forward and backward through the transmission of the rack. The front bearing cover on the end face is movable. When assembling and disassembling, just unscrew a wing nut, and the bearing cover and the rotating drum can be pulled out. The two ends of the placement drum are made with convex square rings, which are embedded in the bearing chamber to prevent oil from penetrating into the powder and preventing adhesion and clogging.
3. Reducer: It adopts worm gear transmission, and the box can store engine oil to ensure good gear lubrication and no noise. There is a sight glass on the box to observe the operation status and oil storage. The outer end of the worm gear is equipped with an eccentric shaft to drive the rack to reciprocate.

Rice husk pellet making machine

Heating pellet machine
1. The pellet machine is a kind of machine that uses the swinging action of the rotating drum to grind the wet powder raw materials into particles through a wire sieve.
2. In the chemical industry, it is used to grind wet powder into granules, and then press tablets after drying. It can also crush lumps that have agglomerated during storage or agglomerated during chemical processing. In the food industry, it is used to process candies, sugar mixtures, malt and other products. In other industries, it is used to form granules for mixtures such as ceramics and plastics.
3. It is not suitable for semi-solid, fluid, slurry or abrasive use.

Qualifications and Honors

Hot Tags: straw pellet machine, China straw pellet machine manufacturers, suppliers, factory, pellet making machine for pellet stove, biomass charcoal making machine, pellet stove maker, sugarcane bagasse briquette machine, Charcoal Rod Making Machine, Charcoal Briquette Machine