Fuel Pellet Machine

Installation of the pelletizer
1. Confirm the installation position of the pellet mill accurately and place the pellet mill on the reserved position.
2. Adjust the level and verticality of the pellet mill to ensure its stability.
3. Confirm the model and length of the conveyor and install it.
4. Connect the conveyor pipe with the pellet mill and make sure the connection is sealed.
5. Install the motor and connect it to the pelletizer.
6. Adjust the speed and direction of the motor to ensure that it matches the pelletizer.

Using the Pelletizer
1. Before using the pellet mill, it is necessary to carry out a trial run to make sure that it operates normally.
2. Put the raw materials to be processed into the feeding port of the pellet mill and adjust the feeding speed and quality.
3. according to the model of the pellet machine, determine the appropriate discharge port, and regularly clean the discharge port and discharge pipe to avoid clogging.
4. After use, you need to turn off the power of the pellet mill and carry out maintenance.

Fuel pellet maker

First, the biomass pellet burner before the start-up of precautions
1, biomass pellet combustion machine in the boot before starting, check the furnace hearth, see whether the last use of the grate is cleaned up, whether the door is cleaned up ash, if not cleaned up, cleaned up in a timely manner.
2, open the use of matching control cabinet , check whether the circuit is normal; check whether the inlet and outlet pipe piping is normal, check whether the circulating cooling water tank has cooling water, to ensure that the biomass pellet combustion machine water jacket whether there is cooling water.
3, the biomass pellet burner hopper filled with biomass pellet fuel.

Corinth pellet mill

Starting steps of biomass pellet burner
1,Turn on the power switch, start the oxygen replenishment system, and adjust the air volume to a smaller one.
2,Click the feed button in the touch screen, observe the furnace chamber to put in the right amount of primer.
3,Click the electronic ignition button or manually ignite the furnace chamber.
4,Close the door of the furnace, and adjust the air volume of the oxygen supplement fan to be larger.
5,Observe the furnace chamber, start the feeding system.
6, gradually adjust the oxygen supplement fan air volume to the appropriate size, feeding speed and air volume should be gradually increased, should not be accelerated too quickly, nor too slow, to ensure that the biomass pellets in the furnace chamber fully combustible.
7, after the flame combustion in the furnace chamber is stabilized, the feed rate will be adjusted to the appropriate size, so that the furnace temperature rises normally.
8, in regulating the biomass burner at the same time, to promptly adjust the supporting thermal equipment induced draft fan air volume, to ensure that the furnace chamber is in a negative pressure state, so that the biomass pellet burner within the flame jet into the thermal equipment, to provide the heat required for heating.

Hot Tags: fuel pellet machine, China fuel pellet machine manufacturers, suppliers, factory, biomass pellet press for density control, wood pellet manufacturing packaging, pellet production equipment for biomass pellet capacity, biomass pellet manufacturing safety, home use pellet mill, pellet making equipment for biomass pellet process