Flat Die Pellet Mill

Pellet maker for wood stove

Sawdust pellet making machine
              The pressure roller of straw pellet making machine keeps a certain gap, 0.1-0.3mm is suitable. If the pressure of grass powder, can increase 0.5mm. gap adjustment is particularly important. Too large a gap will affect the production efficiency of the pelletizer, and even can not press out the particles. Too small a gap will accelerate the wear between the pressure rollers, reducing the service life of the mold.

wood pellet manufacturing machine

Pellet mill for wood pellets
            The screws are loose. Observe whether the pressure roller retaining ring is damaged and replace it in time. Incorrect assembly of the pressure roller assembly may also easily cause the screw to break. If the screw is dislodged into the pelletizing equipment, stop the machine immediately for inspection and cleaning. Otherwise, small metal foreign matter will roll back and forth between the pressure roller and straw pellet machine, blocking the mold hole, even causing breakage and pressure roller damage.

wood fuel pellet making machine

Small wood pellet machine
            Remind everyone to regularly check the wear and tension of the pressure roller of the wood pellet machine. If you find the pressure roller bearing clearance is large, you should loosen the retaining ring and lock the round nut to reduce the bearing jump. Check whether the bolts, screws and scrapers of the pressure chamber are loose, and the screws connecting the ring mold and the driving wheel should be loosened.

Hot Tags: flat die pellet mill, China flat die pellet mill manufacturers, suppliers, factory, biomass pellet manufacturing packaging, pellet making equipment for biomass pellet packaging, wood pellet mills for home use, pellet production equipment for biomass pellet process, pellet mill for wood, wood pellet forming process