Products

Large Wood Crushing Equipment
video
Large Wood Crushing Equipment

Large Wood Crushing Equipment

Wood chippers can be used to crush a variety of wood types.

Features

Products Description

 

The most easily worn parts in wood crushers are blades. Blades need to be replaced in time after being used for a period of time. This is the only way to ensure the production efficiency of the wood crusher. If the blades are not replaced in time, the wood crusher will discharge unevenly, reduce output and affect quality. There are also tips for replacing wood crusher blades.

 

Product Parameters

 

Model

HR6100 Mobile branch crusher

Power

Two choice diesel engine 32hp or motor 4P-22KW

wheel size

165/70r13

Wheel hub size

13 inch aluminum alloy wheels

 

Product Analysis
garden shredder chipper
 

When replacing the blade of the wood crusher, the machine should be shut down and the power should be turned off. When the blade is not sharp, it should be sharpened in time. If the blade is not worn much, it can be sharpened with an oil stone. If it is worn seriously, the flat blade can be sharpened with a flat grinding wheel, and finally sharpened with an oil stone. The blade angle should be less than 37°. When grinding with a grinding wheel, coolant should be added to prevent the blade from annealing. If the blade is severely worn, a new blade needs to be replaced, and the blade height should be adjusted. The edge of the flat blade should be exposed outside the disc. After the vertical height is adjusted, the blade pressure bolt should be tightened after adjustment to prevent the blade from moving and damaging the wood crusher.

 

Adjust the fixed blade, the gap between the fixed blade and the moving blade should be adjusted to 1 to 2 mm. After replacing the blade, check whether the bolts of each part are tightened. If they are loose, tighten them. Turn the pulley by hand. There should be no friction between the machine parts and the casing to ensure safety.
After starting the machine, the machine can only be fed when it reaches the normal speed. It is not allowed to start with materials. When feeding, the hand should not go deep into the feeding port to avoid being hit. If the machine makes abnormal noise during operation, it should be stopped for inspection to eliminate the fault and avoid damage to the machine.

garden chipper
 

 

Qualifications and Honors

 

Qualifications and Honors

 

Customer visit

 

Customer visit

 

 

 

Hot Tags: large wood crushing equipment, China large wood crushing equipment manufacturers, suppliers, factory, wood shredder machine, portable wood chipper, garden wood chipper, Electric wood shredding equipment, heavy duty electric wood chipper, Orchard Chippers

You Might Also Like

(0/10)

clearall