Garden Branch Chipper

After pruning, the branches are simply gathered into several piles along the row, and then two people use a branch crusher to crush the piled branches one by one. The efficiency of the crushing process is 2-3T/H, and the fuel consumption is 2 liters/hour. The debris after the branches are crushed is 7cm long, 2cm wide, with an average area of ​​about 1cm and a thickness of about 0.2cm, which can be used to cover the tree tray. If the tree tray is covered with mulch or ground cloth in the previous year, the base number of weeds is relatively small, and the branch debris covers 5-7cm, the height of the weeds in the growing season can be controlled below 40cm. Because the debris is coarse, most of it has not rotted from the time it is covered on the soil surface in mid-March to mid-November, but it does not affect mechanical operations such as rotary tillage and ditching.

The portable branch crusher is easy to use, highly efficient, and reasonably priced. It is suitable for use in large orchards. When using it, please note: do not move the machine while it is running. If the machine is stuck and stops, shut it down for inspection. Wear goggles, ear protection, and labor protection gloves when working to prevent noise from causing harm to the operator. The machine is equipped with an emergency stop switch for emergency shutdown. In addition, branches pruned that year are easy to crush, while branches that have lost water over the years are more difficult and easy to get stuck in the machine. When the machine is stuck, stop the machine first, then disassemble the machine according to the instructions, and perform simple repairs to remove the blocked foreign matter.