Tree Shredder

How to use Tree chipper?
1, the use of this machine, do not change the power and speed, grinding knife angle, keep the original straight line 28-30 degrees.
2, change the particles, need to change Luo, adjust the knife at the same time, Luo hole minimum not less than 14mm (diameter), the maximum is not greater than 20mm (diameter), adjust the length of the knife between 3-6mm, the bottom of the knife plate and the knife gap is not greater than 1mm.
3, the machine can powder diameter 3cm-20cm below the wood into particles.

Wlectric chipper

Branch shredder tips and tricks：
1, wood crusher should be fixed on the ground, you can use cement to fix.
2, wood crusher in the work of the machine before the start of the test machine, is a simple rotation of the spindle to see whether the bearings are running normally, before the installation to check the gap between the components is firm, check whether the foundation is smooth, because the installation is basically stereotypical, re-installation of the wood crusher is more time-consuming, it is also a waste of materials;
3,The crusher and motor should be installed on the machine base made of angle steel.

Wood mulcher

Heavy duty wood chipper
                  Wood crusher start operation should pay attention to the wood crusher machine whether there is debris, wood crusher test machine to see whether the reversal, put less material to see whether the finished product processed into the colour of the standard, wood crusher customers to buy home in the installation of the test machine to put the timber as far as possible, such as the first piece of wood all into the feed port and then put the second piece to avoid jamming the situation.

Hot Tags: tree shredder, China tree shredder manufacturers, suppliers, factory, shuliy charcoal machine, charcoal coal big pellet making machine, Wood Branch Chipper, Stamping Type Briquette Press, making sawdust briquettes, Fuel Cube Briquette Press Machine