Wood Coal Making Machine

Reasons why Activated charcoal making machine is popular:
1. The use of coal stick machines can reduce the demand for lump coal: most industrial boilers and kilns are layer-fired and need to burn lump coal; the fertilizer industry requires lump coal to produce syngas and fuel gas. The development of industrial briquettes can alleviate the shortage of lump coal and at the same time open up a technical approach for the rational and effective utilization of pulverized coal.
2. Using a coal stick machine can improve the combustion efficiency of raw coal and reduce energy waste: using a coal stick machine to use advanced stoves to turn raw coal into briquettes, the thermal efficiency is twice as high as burning loose coal. Among various clean coal technologies, the energy conversion rate of industrial coal briquettes is higher, and the particle size of boiler briquette products is larger, which can ensure the required gaps during combustion, resulting in higher combustion efficiency and less coal exposure. Compared with burning raw coal, it can save 15% to 20% of coal.
3. The coal stick machine can make raw coal clean. As a clean coal production technology, the coal stick machine has the advantages of simple operation, mature technology, low cost, obvious energy saving and efficiency improvement, and reduced exhaust gas emissions. It can be said to be an ideal briquette equipment.

Charcoal coal big pellet making machine

Bio coal making machine Advantages:
Using a coal stick machine can reduce environmental pollution: After using a coal stick machine to turn raw coal into briquettes with modern combustion equipment, compared with burning raw coal, SO2 emissions are reduced by about 40% ~ 60%, NO2 emissions are reduced by about 40%, and soot emissions are reduced. Reduced by about 60%, the environmental protection effect is obvious. Adding sulfur-fixing agents and binders during briquette processing can reduce SO2 emissions by 40% to 50% and also reduce solid dust emissions.

Charcoal making equipment

Reasons why Carbon making machine does not discharge materials:
1. First check whether the coal is too dry, the amount of coal feeding is too large, and the wear gap of components is too large. Treatment: add water appropriately, adjust the amount of coal feeding at the feeding port, check the hydraulic coupler, and replace wearing parts.
2. The reason why the hydraulic coupling speed cannot reach the speed: the driving motor of the coal rod machine is faulty or the connection is incorrect, and there is too little oil in the equipment. Treatment: check whether the current and voltage are normal and whether the link is correct. Check whether the rotating part of the equipment is braked. In case of malfunction or overloading, check the oil quantity, and check whether there is oil leakage on the joint surfaces of each assembly, oil seals, etc.
 

Our team

Our packaging

Hot Tags: wood coal making machine, China wood coal making machine manufacturers, suppliers, factory, Fuel pellet production line, small wood pellet mill, Coal Powder Briquetting Machine, heating pellet machine, home made pellet maker, carbonization oven