Lump Charcoal Making Machine

Operation steps
1. Open the door of the briquetting machine and put the waste to be compressed into the compression chamber. Be careful not to exceed the capacity limit of the compression chamber.
2. Select the appropriate pressure and working time, adjust the various parameters on the operation panel, and ensure that the briquetting machine can work normally.
3. Start the briquetting machine, start compressing the waste, and control the pressure according to the required working time until the compression is completed.
4. After the briquetting machine is finished, close the door and take out the compressed solid blocks.

Precautions
1. When using the briquetting machine, you must pay attention to safety. Do not put your hands into the compression chamber to avoid injury.
2. When compressing waste, you must ensure that the waste is evenly distributed in the compression chamber to avoid affecting the service life of the briquetting machine.
3. Clean the filter and oil circuit of the briquetting machine regularly and replace the filter to ensure smooth operation of the equipment.
4. If you encounter problems during the use of the briquetting machine, you should stop the equipment in time. If you cannot solve it yourself, you should contact a professional maintenance person immediately.