Products

Home Products Ring Die Wood Pellet Machine Details

Vertical Ring Die Straw Pellet Machine

Ring die pellet machine can produce high quality pellet fuel.

Send Inquiry

Features

Products Description

The ring die pellet machine should be installed on a smooth and solid ground to ensure the stability of the machine during operation.
During the installation process, carefully check whether all components are installed in place and whether the fasteners are tightened.
After the machine is installed, a test run should be carried out first to check whether all components are operating normally and whether there are any abnormal sounds or vibrations.
Check the gap between the ring die and the pressure roller to ensure that the gap is reasonable (generally 0.1~0.3mm) and adjust it to the best state.
Check the oil level of the gearbox to ensure that the oil level is appropriate and replace the lubricating oil regularly.

Product Parameters

Model	Power	Dimensions
MK-250	15kw	11204401060mm
MK-300	22kw	12805601220mm
MK-350	30kw	13006001250mm

Product Analysis

①. The wood chip pellet machine can produce biomass pellets made of various raw materials such as wood chips, straw, and husk.
②. The cold pressing, extrusion molding and other molding technologies are adopted, and the grease polishing molding process makes the biomass pellets beautiful in appearance and compact in structure.
③. The wood chip pellet machine has high output, low energy consumption, low noise, low failure, strong machine fatigue resistance, continuous production, economical and durable.
④. The whole machine adopts special high-quality materials and advanced shaft transmission device, and the key components are made of high-quality alloy steel and wear-resistant materials.

⑤. The wood chip pellet machine mold is placed flat, with the mouth facing upward, and enters the pelletizing mold directly from top to bottom.
⑥. The wood chips are very light in specific gravity, and they go straight up and down. After entering, the sawdust is rotated and thrown around by the pressing wheel to evenly press the pellets.
⑦. The wood chip pellet machine is open upward, which is easy to dissipate heat. In addition, it is equipped with a set of air-cooled bag dust removal and automatic oiling.
⑧. The wood chip pellet machine has a strong large shaft and a large cast steel bearing seat. Its large bearing does not bear any pressure, is not easy to break, and has a long life.