Is The Solid Waste Briquetting Machine Easy To Operate?

The solid waste briquetting machine is an equipment that crushes and compresses raw materials such as domestic waste, industrial waste, waste cloth, paper mill waste, leather, plastic, sponge and other solid waste into efficient and environmentally friendly fuel. The briquette fuel produced by this equipment has a large specific density, high calorific value, and is resistant to combustion. It can replace wood, coal, liquefied gas, etc., and is widely used in industrial boilers, waste power plants, etc. The briquetting machine disposes pre-crushed solid waste. The materials are evenly sent to the inlet of the briquetting machine through the conveying equipment, and the materials are evenly dispersed into the working area of the briquetting machine. Through the comprehensive action of the equipment, the materials are forced into The block is extruded and falls from the discharge port. The RDF briquetting machine uses solid waste as raw material, and after crushing, pressurizing, densifying, and shaping, it becomes a small rod-shaped solid briquetting fuel. It is an ideal equipment for waste reuse. It can be seen that the device is very easy to operate.

Equipment advantages:
1. The RDF molding machine is currently the mainstream equipment for fuel molding. It can briquette combustible solid waste materials that are loose in texture, have low calorific value, and are difficult to transport and store. It can reduce the volume of the material and increase the calorific value of the material.
2. Designed the pressure wheel, forming mold, anti-stuffing machine, fully automatic oil pump and other mechanisms, which have the advantages of reasonable structure, high production efficiency, low energy consumption, strong adaptability, simple operation, reliable performance, easy to move and so on.
3. The RDF fuel produced is in the shape of long granules, with a calorific value close to that of coal. It is a very good alternative fuel and is widely used in waste power plants, cement plants, various industrial boilers, etc.

Operational skills before starting
*Check whether all connecting parts are fastened reliably.
*Check whether there are any debris inside or outside each part.
*Check whether the bearings and lubricating parts are short of oil.
*Check whether the instruments in the control cabinet display normally.
*Check the electrical wiring for damage.