Saw Dust Pellet Machine

Sawdust pellet mill
                How to use the wood pellet mill: start the wood pellet mill after adding hyperbolic gear oil in the gearbox. Stabilize the installation of the wood pellet mill, check whether the steering meets the requirements and whether the screws of each part are loose.

Building a pellet mill

Bamboo pellet machine
                 Loosen the gap adjusting screw on the roller seat of the wood pellet machine and make the feeder in no-load state. The machine can be put into use after normal operation. Before using the new machine, take wood chips or grass powder, vegetable oil or waste engine oil 10 kilograms, mix well, and then screw on the gap adjustment screw.

Corinth pellet mill

Biomass pellet press
                  Make the two rollers rotate at the same speed, gradually add oil feed, continue to tighten the adjusting screw of the pressure wheel until the material is slowly discharged. The extruded granular material will be repeatedly crushed and squeezed to make the grinding holes lubricated and smooth, and then process the required mix of raw materials.

Hot Tags: saw dust pellet machine, China saw dust pellet machine manufacturers, suppliers, factory, wood pellet forming process, biomass wood pellet machine, commercial wood pellet mill, industrial wood pellet machine, homemade pellet mill, pellet mill for wood