Ring Die Biomass Briquetting Machine

Wood briquette making machine
                      Considering that the raw materials are straw and straw, in order to avoid tangling and blockage during the working period, it is decided to change the traditional situation that the press mould rotates while the press roll does not move. It is decided to change the traditional briquette making machine that the press mould rotates while the press roll does not move, and adopt the ring mould fixed. The pressure roller is driven by the drive shaft to rotate the working mode. The ring mould is fixed on the body, two pressure rollers are fixed by the front and back of the plate connection, the back of the plate and the drive shaft connection driven by the motor rotation. Pressure roller in the public rotation at the same time due to friction and material rotation, due to "a shaft" design ideas. So the drive shaft is driven by a motor.

Ring die straw briquette machine

Waste wood briquetting machine
                     Therefore, the gear reducer in the screw conveyor of traditional briquetting machine can be replaced by frequency converter. In this way, a large speed range can be obtained. In order to ensure the forming rate and output of the finished products. Pressure roller and die gap between the experimental evidence in the 0.2 ~ 0.5mm between the most suitable. Commissioning or wear and tear to adjust the gap can be adjusted by the eccentric shaft. Turning the handle to turn the eccentric shaft can change the distance between the pressure roller and the ring die.

Ring mold briquette press

Ring Die Biomass Briquetting Machine
                    As the pressure roller is rotating during the work, it is necessary to prevent the pressure roller from rotating in an axial direction. In order to prevent the rollers from moving axially, a direct-acting round nut is used to position the rollers. The front and rear plates are bolted together so that the two rollers are confined in the ring die cavity by the front and rear plates. Due to the harsh operating conditions, the bearing seals will be labyrinth seals.

Hot Tags: ring die biomass briquetting machine, China ring die biomass briquetting machine manufacturers, suppliers, factory, tool ring molds moulding machine, Wood briquetting machine, cotton stalk briquette making machine, Ring Die Biomass Briquetting Machine, ring molds shaper, system ring molds briquetting machine