Daily Maintenance And Precautions Of Biomass Pellet Machine
1. Regular inspection
Appearance inspection: Check whether there are obvious damage or wear marks on the appearance of the equipment.
Connection inspection: Check whether the connection of each component of the equipment is firm and whether the screws are loose.
2. Cleaning and maintenance
Remove ash accumulation: Regularly remove ash and dirt inside and outside the combustion equipment, especially in the combustion chamber, heat exchanger and filter.
Cleaning the burner: Clean the burner regularly to ensure the cleanliness of the nozzle and the surface of the burner to prevent blockage and carbon deposition.
3. Lubrication and maintenance
Lubricate moving parts: Lubricate the moving parts of the equipment regularly to prevent wear and jamming.
Check lubricating oil: Check the oil level and oil quality of the lubricating oil and replace it if necessary.
4. Check combustion parameters
Check combustion temperature: Check the combustion temperature regularly to ensure that it is within the normal range.
Check exhaust temperature: Check the exhaust temperature regularly. Too high or too low may indicate abnormal combustion.
| Model | Capacity | Power | Dimensions |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm |
| MK-400 | 400-600kg/h | 37kw | 1390*650*1290mm |
| MK450 | 600-800kg/h | 45kw | 1620*700*1600mm |
5. Check the electrical system
Check the electrical connection: Check regularly whether the electrical connection is firm and whether the wires are aged or damaged.
Check the function of the control system: Check regularly whether the function of the control system is normal and ensure that all parameters are set correctly.
6. Check the fuel supply system
Check the fuel pipeline: Check regularly whether the fuel pipeline is leaking or damaged.
Check the fuel pump: Check the working status of the fuel pump regularly to ensure that it operates normally.
7. Check the safety device
Check the safety valve: Check the working status of the safety valve regularly to ensure that it can open normally under overpressure.
Check the alarm system: Check the working status of the alarm system regularly to ensure that it can issue an alarm in time under abnormal conditions.
