Knowledge

There are four maintenance methods for the motor of the mechanism charcoal machine

The mechanism charcoal machine mainly uses an electric motor to increase electrical energy. So the motor is an important component of the mechanism charcoal machine. To prevent accidents during the use of the mechanism charcoal machine, it is necessary to regularly maintain the motor. So how should the motor of the mechanism charcoal machine be maintained?
1. The temperature of the motor during normal operation should not exceed the allowable limit. During operation, the operator of the charcoal machine should regularly monitor the temperature rise of each part.
2. Check if the motor of the charcoal machine is loaded with current. When the motor malfunctions, it will cause a sharp increase in stator current, causing the motor to overheat. If it is a large-scale mechanical charcoal machine production line, an ammeter should be installed to monitor the motor load current when using a high-power motor. The load current of the motor should not exceed the specified current value on the nameplate.
3. Pay attention to the odor, vibration, and noise of the motor, as the winding may emit an insulation burnt smell due to high temperature. There are some malfunctions in the mechanism charcoal machine, especially mechanical failures, which can quickly react to vibration and noise. Therefore, when smelling a burnt smell or discovering abnormal vibration or friction sounds, especially loud "buzzing" sounds or other noises, power should be cut off immediately for inspection.
4. After checking the heating and oil leakage of the bearings of the charcoal machine, replace the lubricating oil regularly. Generally, when replacing lubricating oil, clean the bearings and bearing covers with kerosene, and then clean them with gasoline.

You Might Also Like

Send Inquiry