How to Maintain the Biomass Press Briquette Machine
Why Regular Maintenance Extends the Life of a Briquette Machine
A biomass press briquette machine works by forcing biomass material through a die under high pressure, and this process wears the roller and the die in every working hour. The roller and the flat die are the main spare parts of the machine, and they fail quickly when lubrication is neglected or when foreign objects enter the chamber. Regular maintenance protects these parts, keeps the output density stable, and prevents sudden breakdowns. A machine that is checked and lubricated on a fixed schedule produces briquettes of consistent quality and costs far less to operate than one that is run until something breaks.
The MKYK series is a typical range of biomass press briquette machines used in small and medium production plants. The table below lists the main specifications of this series.
| Model | Power | Mold Hole | Capacity for biomass | Pellet size |
|---|---|---|---|---|
| MKYK-36 | 45 kW | 36 | 1.0-1.5 t/h | 32*32*50-100 mm |
| MKYK-48 | 75 kW | 48 | 1.5-2.5 t/h | 32*32*50-100 mm |
| MKYK-72 | 110 kW | 72 | 2.5-3.5 t/h | 32*32*50-100 mm |
| MKYK-90 | 132 kW | 90 | 3.5-5.0 t/h | 32*32*50-100 mm |
| MKYK-120 | 200 kW | 120 | 4.0-6.0 t/h | 32*32*50-100 mm |
| MKYK-150 | 250 kW | 150 | 6.0-10.0 t/h | 32*32*50-100 mm |
Lubrication Schedule for Bearings and Rotating Parts
Lubrication is the most important daily task for a briquette machine. The main bearing of the machine should be greased every half month, and the bearing of the compression roller should be oiled every day. Each rotating part of the machine should have enough lubricant at all times. Running the machine with dry bearings accelerates the wear of the roller and the main bearing, because metal parts run against each other without a protective oil film. Use the grease and oil grades specified in the machine manual, and wipe the lubrication points clean before adding fresh lubricant so that dust is not pushed into the bearing.
Checking Roller and Die Clearance
The compression roller and the flat die work as a pair, and their clearance directly affects the output and the wear rate. Check regularly whether the clearance of the compression roller and the flat die is proper, whether the position is correct, whether the fastening screws are tight, and whether the lubricant is sufficient. A clearance that is too large reduces the pressing force and produces loose briquettes, while a clearance that is too small increases wear and can damage the die surface. The fastening screws of the roller must be tightened to the specified torque, because loose screws change the position of the roller and cause uneven wear.
Keeping the Die Clean and Removing Hard Contaminants
To prolong the service life of the die, inspect it regularly and keep the inside of the ring die clean. Blocked die holes reduce the output and force the machine to work harder, and compacted material left in the holes can become permanent damage. Clean the die holes with the correct tools after the machine has stopped. Never use a hammer to unpack or disassemble the machine, because hammer blows damage the smoothness of the outer surface and can deform precision parts. Disassembly should follow the manual and use the proper tools so that the sealing surfaces and the alignment of the parts are preserved.
Hard objects are the most dangerous threat to a briquette machine. If hard things such as metal scraps and stones enter the chamber of the machine, they can damage the roller and the die in a single pass, scoring the die holes and chipping the roller surface. Remove hard contaminants as soon as they are detected, and stop the machine before attempting removal. In normal operation, screen the raw material and pass it through a magnetic separator before feeding, so that metal fragments and stones are caught before they reach the chamber. Checking the feed material on a regular basis is much cheaper than replacing a damaged roller and die.
A Daily and Weekly Maintenance Checklist
A practical maintenance checklist for a biomass press briquette machine has two levels. Daily: oil the compression roller bearing, check the lubricant level of each rotating part, and watch the machine sound and output during the first minutes of operation. Weekly: check the clearance and position of the roller and the flat die, tighten the fastening screws, inspect the inside of the ring die for blocked holes, and verify that the feed material is free of metal scraps and stones. Following this checklist keeps the machine in good condition and gives the roller and die their full service life.
Frequently Asked Questions
How often should the main bearing be greased?
The main bearing of the briquette machine should be greased every half month, and the bearing of the compression roller should be oiled every day.
What happens if the bearings run dry?
Without enough lubricant, the roller and the main bearing wear quickly because metal parts run against each other without an oil film, which shortens the service life of the main spare parts.
How do I check the roller and die clearance?
Check whether the clearance is proper, the position is correct, the fastening screws are tight, and the lubricant is sufficient, and adjust the clearance to the value in the manual.
Can I use a hammer to disassemble the machine?
No. Hammer blows damage the smoothness of the outer surface and can deform precision parts, so disassembly should be done with the proper tools according to the manual.
What should I do if metal scraps enter the chamber?
Stop the machine and remove the hard contaminants immediately, because metal scraps and stones can damage the roller and the die. Screen the material and use a magnetic separator to prevent them from entering.
Why must the inside of the ring die be kept clean?
Blocked die holes reduce the output and force the machine to work harder, so keeping the die holes clean prolongs the service life of the die and keeps the briquette quality stable.

