Products

Coal Rod Production Equipment
video
Coal Rod Production Equipment

Coal Rod Production Equipment

The carbon powder extruder is of high quality and easy to operate.

Features

Charcoal maker machine
When we test the machine, we must first remove the motor V-belt, let the motor run idle, and observe whether the running direction is consistent with the running direction of the main machine. The running direction must be the same as the direction indicated on the large pulley. Then install the V-belt and turn it by hand to make the carbon powder forming machine perform several stamping actions to observe whether the various parts of the machine are accurately coordinated. If there are any uncoordinated movements, they should be adjusted to make them coordinated. All lubricating parts should be filled with lubricating oil before the machine can be tested. Reversal is strictly prohibited.

 

Charcoal making machine

Charcoal making machine

Model Capacity Roating speed Power Model size Dimension(m) Weight
MK-140 2-3(t/h) 46-60(r/min) 11KW 30-40mm 1.4*0.9*0.6 1.5t
MK-180 3-4(t/h) 38-50(r/min) 22KW 30-60mm 1.6*1.1*1.3 2.4t

 

Charcoal manufacturing machine
Then during the test run, first use the inching method to make the motor rotate in pulses. If there is no other noise and it runs normally, you can run the empty car for running-in, and the time must not be less than 1 hour. During this period, you must pay attention to observation. If you find any problems, stop the car in time to solve them. Only when the empty car runs normally can you feed the materials. When using it, carefully observe whether there are abnormal noises, collisions, deformations, vibrations and other undesirable phenomena in various parts of the machine. If there are any, stop the machine in time for adjustment.
In the common sense of maintenance and repair, the use and maintenance of charcoal briquetting machine equipment: in order to make the charcoal briquetting machine produce normally, extend the life of the machine, give full play to the maximum efficiency of the machine, reduce failures, and avoid accidents, maintenance work must be done well.

 

Charcoal maker machine

Charcoal maker machine

 

Charcoal briquetting machine
In order to ensure the normal operation of the machine and reduce machine wear, lubricating oil should be added regularly as required. In the normal production process, the wear of each part and the adjustment of the gap should be checked frequently, and each part should be cleaned regularly, the grease of the bearing should be replaced, and the oil eye should be dredged. After replacing the worn parts, the working positions of the components should be readjusted.

 

Qualifications and Honors

Qualifications and Honors

 

Hot Tags: coal rod production equipment, China coal rod production equipment manufacturers, suppliers, factory, charcoal powder extrusion wholesaler, charcoal powder shaping manufacturer, coke briquetting machine, extrusion supplier for charcoal powder, coal briquetting plant, charcoal powder briquette machine

You Might Also Like

(0/10)

clearall