Products

Hexagonal Coal Rod Extruder
video
Hexagonal Coal Rod Extruder

Hexagonal Coal Rod Extruder

Carbon powder extruder is the best choice for producing carbon rods.

Features

Products Description

 

After the extruder screw has been used for a period of time, a large amount of foreign matter and residue will accumulate, affecting the normal use of the extruder. Conventional cleaning is the simplest and most basic cleaning method, which requires a certain amount of experience and patience.
1. First, open the extruder screw feed port and clean up the debris inside the extruder.
2. Then, remove the extruder screw and screw sleeve, and soak them in a professional cleaning agent for about five minutes.
3. Use a bottle brush to clean the screw surface and inner hole, and be careful not to scratch the screw surface.
4. After cleaning, rinse the screw and screw sleeve with clean water, and install them back into the extruder after drying.

 

Product Parameters

 

Charcoal dust briquette extruding machine bbq coal stick charcoal extruder rice hull charcoal extruder machine

Working type

Model

Capacity for coal

Capacity for charcoal

Power

 

Extruding Type

 

 

ET-1

200-250kg/h

500kg/h

11+0.55kw

ET-2

250-500kg/h

500-1000kg/h

18.5+1.1kw

ET-3

1500kg/h

not suitable for charcoal

22+3kw

 

Pressing Type

 

 

YM-140

1.86-2tons/h

0.93-1ton/h

7.5kw

YM-160

1.86-2tons/h

0.93-1ton/h

11kw

YM-220

1.25tons/h

2.5tons/h

15kw

 

Product Analysis
coal dust briquetting machine
 

If conventional cleaning cannot remove stains on the surface of the screw, chemical cleaning methods can be used. Chemical cleaning agents can dissolve residues and make the cleaning effect more thorough.
1. Remove the extruder screw and soak it in a professional cleaning agent for at least half an hour.
2. Swing the screw so that the cleaning agent can enter the inside of the screw sleeve and fully dissolve the residue.
3. Use tools such as bottle brushes to clean the surface and inner hole of the screw.
4. After cleaning, rinse the screw and screw sleeve with clean water, and reassemble them back into the extruder after drying.

 

1. The extruder should be regularly inspected and the parts with severe wear should be replaced.
2. Overloading the machine is not allowed, and the appropriate machine model should be selected according to production needs.
3. For extruders that have not been used for a long time, proper care and maintenance should be carried out, otherwise the machine will rust and damage.
4. The working environment of the machine should be dry and ventilated to avoid moisture and dust erosion.
In short, the maintenance of the extruder is the key to ensure its long-term stable operation and extend its service life.

coal press machine
 

 

Qualifications and Honors

 

Qualifications and Honors

 

Customer visit

 

Customer visit

 

 

 

Hot Tags: hexagonal coal rod extruder, China hexagonal coal rod extruder manufacturers, suppliers, factory, charcoal powder extrusion quality, sawdust briquette charcoal making machine, Charcoal Making Machine, extrusion service for charcoal powder, charcoal powder extrusion alternative, wood charcoal making machine

You Might Also Like

(0/10)

clearall