Coal Rod Making Machine

Burning rod making machine operating instructions:

Lubricating oil is often added during use. Lubricating oil is a good helper to assist the coal rod extruder. Continuous heating and friction will cause slowness, which will cause safety hazards for your use. During work, non-staff are not allowed to enter or exit. During use, do not touch the body of the coal rod extruder with your hands to avoid overheating and burns or other safety hazards. During the use of the coal rod extruder, you must constantly check the temperature of the bearings. When the temperature rises and cannot be lowered, you need to stop the machine and check whether the belt is too tight, causing increased friction and causing the temperature of the bearings to heat up. Only Only when the bearing temperature is normal can the safety of use be ensured.

Carbon powder extrusion equipment

Fuel rod production machine principle:
The coal rod extruder uses the screw extrusion principle to compress the prepared cheap pulverized coal into cylindrical or plum-shaped coal rods with a certain strength. It is used to replace expensive lump coal. It can make full use of cheap pulverized coal and reduce fuel consumption. cost. The coal rod extruder uses a variable pitch impeller to forcefully push the coal powder at the rear of the barrel forward. After the coal powder is compressed in the barrel, it is extruded through the round hole in the front head to form coal rods. , there are many shapes of round holes, and there are also many shapes of coal sticks. The coal rod is naturally broken due to gravity during the advancement process.

Charcoal extrusion equipment

Coal rod extrude precautions:
The coal rod extruder, like other mechanical equipment, must pay attention to safety during use. So how can we ensure the safety of the coal rod extruder? The use of the coal rod extruder must first start with the installation. It must be ensured that the installation is firm. Parts prone to loosening must be inspected frequently to ensure the safety of future use. Before use, the production route of the coal rod extruder must be properly arranged, and there must be no obstacles in the channel. When using the coal rod extruder, you must first start the machine for a test run. Only after ensuring that the machine is operating stably can you put in the materials. The materials must be put in strictly in accordance with the requirements. If too much material is put in, it will cause blockage or the machine will be stuffy, which will affect your use. causing safety hazards.

Our team

Customer visit

Hot Tags: coal rod making machine, China coal rod making machine manufacturers, suppliers, factory, briquette extruder machine, charcoal powder shaping alternative, charcoal forming order for powder, charcoal forming distributor for powder, charcoal forming purchase for powder, Carbon Powder Extruder