Coal Briquette Making Machine

Charcoal Powder Extruder
Charcoal powder forming machine is also called charcoal powder rod making machine, charcoal powder forming machine, straw coal forming machine, etc. It is a charcoal powder forming equipment that uses the principle of spiral extrusion to compress the modulated charcoal powder into a predetermined shape with a certain strength. The charcoal powder forming machine uses a hardened gear reducer with a small size and high load-bearing capacity. The finished rods can be used for barbecue, heating, hookah, industry, ignition and other multi-functional purposes with low cost and fast payback. It is mainly a new type of charcoal powder forming equipment that can utilize waste, regenerate energy, and turn waste into treasure.

Briquette extruder machine

Carbon Powder Extruder
Things to note before starting the carbon powder forming machine:
1. Before starting the carbon powder forming machine, lubricating oil should be added to the bearings of the rotating parts of the machine regularly;
2. The raw materials need to be processed, and the maximum particle size is less than 2mm. Add water and adhesive to mix evenly; (Note: The material should not be too dry after mixing, otherwise it will be easily blocked);
3. The carbon powder forming machine should idle for two minutes before starting, and then feed after it is normal;
4. Stop feeding before stopping the carbon powder forming machine, stop the machine after the material is extruded, and clean its interior with water;
No matter what equipment it is, it must be operated according to the operating requirements during the process to reduce the occurrence of equipment and personal accidents, resulting in irreversible consequences.

Wood charcoal making machine

Charcoal briquette machine
Before operating the extruder, pay attention to the safety of the equipment. First, check whether the equipment is intact and maintain the safety performance of the equipment; second, wear safety equipment (such as gloves, safety glasses, etc.); finally, pay attention to accident prevention during operation to prevent personnel from being injured.
Before operating the extruder, the raw materials to be processed must be prepared. The raw materials should meet production requirements and have good physical properties, and the quality and temperature of the raw materials should be paid attention to during operation.
Before operating the extruder, the equipment must be cleaned. The purpose of cleaning the equipment is to remove dirt and residues accumulated in the equipment, ensure the hygiene and safety of the operation process, and reduce the occurrence of equipment failures.

Qualifications and Honors

Hot Tags: coal briquette making machine, China coal briquette making machine manufacturers, suppliers, factory, charcoal forming speed for powder, charcoal powder extrusion replacement, charcoal powder shaping comparison, charcoal forming improvement for powder, charcoal powder shaping supplier, extrusion evaluation for charcoal powder