Diesel Powered Pellet Mill

Diesel powered pellet mill
(1) Easy to operate and maintain: automatic air supply and ash removal, simple operation, small workload, single load.
(2) Complete combustion with high efficiency: boiling gasification combustion plus swirl air supply design completes combustion in the combustion chamber, and the combustion efficiency can reach more than 90%.
(3) Safe and stable combustion, the equipment operates under a slight positive pressure, and no backfire and descaling are required. The pellet machine is used to grind wet powder into the required pellets, and can also crush block dry materials into the required pellets. The main features are easy installation and disassembly of the screen, and the tightness can be adjusted appropriately, which is convenient to disassemble and easy to clean.

Pellet briquette machine

Grass pellet maker
The heating temperature of the biomass pellet machine is relatively high. This technology adopts three-stage air supply and a furnace pressure of 5000~7000 Pa to ensure the normal fluidization of the jet zone. It can be used for continuous production, with stable flames and a high temperature section temperature of up to 1300℃, which is suitable for industrial applications.
No tar, wastewater and other waste discharge: The high-temperature gas direct combustion technology and tar and other gas direct combustion form solve the technical problem of high tar content in biomass gasification and avoid the secondary pollution of water quality caused by washing tar.
Wide thermal load adjustment range: The engine thermal load can be quickly adjusted within the range of 30-120% of the rated load, with fast startup speed and sensitive response.

Rice husk pellet making machine

Heating pellet machine
It has a wide adaptability and is suitable for various biomass materials less than 30mm such as biomass pellets, corn stalks, rice husks, peanut shells, corn cobs, sawdust, papermaking waste, etc. The pellet fuel of the biomass pellet machine is made by squeezing raw materials such as sawdust and straw using rollers and ring dies under normal temperature conditions. The density of the raw material is generally about 0.6-0.8, and the density of the pellets after molding is greater than 1.1. It is extremely convenient to transport and store. At the same time, its combustion performance is greatly improved, which brings certain employment problems and economic benefits. The low-temperature staged combustion technology is adopted to reduce the emission of NOx, SO2, dust and other materials in the flue gas.

Qualifications and Honors

Hot Tags: diesel powered pellet mill, China diesel powered pellet mill manufacturers, suppliers, factory, Homemade wood pellet production line, sawdust pellet machine, Charcoal Powder Charcoal Furnace, sawdust briquette maker, fire pellet making machine, pellet machine wood