Forestry Wood Crusher

Check whether all parts of the equipment are intact. After confirming that they are correct, press the start button to start the branch crusher. During the startup process, pay attention to the operation of the equipment. If there is any abnormality, stop the machine immediately for inspection.
Evenly feed the prepared branches into the equipment feed port, adjust the equipment speed and crushing particle size to fully crush the branches. During the feeding process, pay attention to avoid feeding too many branches at one time to avoid overloading the equipment.
After the crushing is completed, collect the crushed materials for subsequent processing. At the same time, clean up the residual materials inside and around the equipment to keep the equipment clean.

After the crushing work is completed, press the stop button to stop the equipment. After the shutdown, check the equipment to ensure that the equipment is fault-free and undamaged, and prepare for the next use.
Clean the branch crusher regularly to remove dust and dirt on the surface of the equipment. Check the tightness of each component of the equipment. If it is loose, tighten it in time. At the same time, lubricate the lubrication parts of the equipment to ensure smooth operation of the equipment.
Regularly inspect the branch crusher and check the wear of the equipment. If there is wear, the wear parts should be replaced in time. At the same time, check the electrical system of the equipment to ensure that the electrical system is safe and reliable.
When the branch crusher is not in use, the equipment should be stored in a dry, ventilated place without corrosive gas. At the same time, take dust-proof, moisture-proof, rust-proof and other protective measures for the equipment to ensure that the equipment is stored intact for a long time.