Forestry Branch Crusher

In addition, sawdust crushed by sawdust crusher is also widely used. It can not only be used as a nutrient for edible fungi, but also as a raw material for organic fertilizer, machine-made charcoal, biomass pellets, papermaking, sawdust board, etc. It can be said that it plays an important role in the development of sawdust deep processing.
Wood chip crusher is a chip cutting equipment that integrates slicing and crushing. It can not only cut branches and branches with a diameter of 1-20 cm, but also cut bamboo, thatch, corn stalks, sorghum stalks and other fiber straw materials. In addition, it has the characteristics of simple operation and good crushing effect, and is now widely used.

The working principle of the wood chip crusher is to use blade cutting and high-speed airflow impact, and then integrate the collision double crushing function to complete the micro-material separation process; then during the blade cutting and crushing process, the rotor generates high-speed airflow, rotates in the direction of the blade cutting, and the material is accelerated in the airflow. Repeated impact causes the material to be double-broken at the same time to complete the crushing of the material.
Therefore, in order to ensure the use effect of the equipment, it should also be maintained regularly. For example, the bearing needs to be greased once after working continuously for 3-4 hours, and pay attention to observation; after the V-belt has been used for a period of time, the tightness should be readjusted, generally 6-10 mm can be reduced each time; after work every day, clean the machine and check whether the machine has cracks or other problems. If found, it should be repaired in time.