Agroforestry Wood Crusher

Finally, turn on the power switch of the wood crusher to check whether there is any abnormality in the idling of the crusher. If there is any abnormality, the cause should be found in time and targeted treatment should be carried out; if there is no abnormality, the fan can be started, and the machine can be fed at a uniform speed after it starts running. However, it should be noted that when feeding is completed, the wood in the silo must be drained before shutting down. In addition, in order to avoid problems such as performance degradation and failure, everyone needs to maintain the wood crusher regularly.

For example, when turning on the wood crusher equipment, you need to give the equipment a certain preheating time first. Do not feed the equipment immediately after starting up. This not only protects the power of the motor, but also allows the fan to pump out the crushed materials remaining in the pipeline; check the blades and screens regularly, because these two components wear out quickly. If they are worn out and not replaced in time, it will not only affect the quality of the crushed materials, but also cause damage to the blades. Therefore, the above two components need to be observed regularly; at the same time, because the wood crusher mainly relies on the speed to crush materials, it is also necessary to regularly lubricate the bearings. After all, only when the bearings rotate smoothly can the speed of the wood crusher be increased, and the efficiency and output of the crushed materials can be guaranteed.