Small Rod Making Machine

Charcoal equipment process:
1. Look at the raw materials. If the raw materials are not suitable, the wood chips need to be crushed as the first step. So what level of crushing is considered just right? 1cm is almost enough.
2. Dry the raw materials. No matter what kind of raw materials, they will contain moisture. The function of the dryer is to control the moisture content of the raw materials between 8-10%, which is beneficial to the stick making machine for making wooden sticks.
3. The rod making machine extrudes the raw materials under high pressure into a hollow shape, which can be hexagonal or square.

Biomass briquette machine

Charcoal extruder analysis:
The raw material rod making is completed in the forming machine (or rod making machine). There is a heating ring outside the molding barrel of the molding machine, which can increase the temperature of the molding barrel to about 350°C. In order to ensure that the carbon fuel rod has high density, smooth surface and no obvious cracks. We can choose the appropriate molding temperature based on the type of raw material and moisture content. Its level can only be determined through field testing. Generally speaking, if we assume that the propeller is good and the moisture content of the raw material is between 6-12%, then we can control the molding temperature of wood chips, wood sawdust, wood flowers and bamboo raw materials at 260-320 between ℃.

Biomass briquette press

Wood charcoal machine development prospects:
In the current context of increasing environmental awareness, the machine-made bamboo charcoal production equipment industry is also constantly exploring and innovating to meet the market's demand for environmental protection, high efficiency, and energy saving. The process of first making rods and then carbonizing is a traditional bamboo charcoal production method. This process first breaks the bamboo into particles of a certain size, then adds a binder for stirring, and then uses a molding machine to make bamboo charcoal rods. Next, the bamboo charcoal rods are put into a batch carbonization furnace for high-temperature carbonization, and finally cooled to obtain the finished bamboo charcoal. It is a device with good development prospects.
 

Customer visit

Our team

Hot Tags: small rod making machine, China small rod making machine manufacturers, suppliers, factory, Rice husk briquetting machine, Small Rod Making Machine, stamping sawdust Briquette Machine, Charcoal Powder Charcoal Furnace, Punching Briquetting Machine, coconut charcoal machine