Charcoal Briquette Press Machine

Introduction to Biomass charcoal making machine:
Small rod making machines can be divided into 50-70 parts according to the size of the forming barrel. The small rod making machine is the main equipment for extruding carbon-containing wood materials (without adding any additives) such as sawdust, rice husks, peanut shells, coconut shells, crop wastes, plant straws, etc. under high pressure and high temperature conditions. The small rod making machine adopts a fully automatic temperature control device. Only at a controlled temperature can carbon rods with high density and high hardness be made. It is easy to operate and maintain, saving a lot of labor. It has turned crop waste into treasure, alleviated the tension between supply and demand of agricultural and forestry resources, and contributed to greening the environment and resource regeneration.

Rice husk charcoal making machine

Coal making machine analysis:

Generally speaking, charcoal machines are used to produce machine-made charcoal, and the requirements for raw materials are also relatively strict. ①The length of the raw material ②The humidity of the raw material. To control the length and humidity of the raw material, a crusher and a dryer are used. Generally, the particle size of the raw material for the production of machine-made charcoal is required to be between 3-6mm, and the humidity is controlled between 6-12%. As long as you master these two aspects, producing high-quality charcoal is easy.Therefore the device has been widely welcomed.

Activated carbon making machine

Charcoal production machine features:
1. Reasonable design, exquisite production technology, simple structure, easy operation, small size, small occupation, saving a lot of labor and saving electricity.
2. Using a fully automatic electric heating device, the temperature can be adjusted to control the dryness and humidity of the rod, thereby achieving a stable effect.
3. The small rod making machine adopts high-strength and wear-resistant materials, which greatly extends the service life and allows every user to use it with confidence.
4. It is suitable for the pressing and molding of various biomass raw materials, with low energy consumption and high production efficiency.
5. The old-fashioned movement had three bearings, but now it has four bearings, which greatly increases the stability and durability of the machine.
6. Increase the screw pitch to increase the feed amount, thereby greatly increasing the output.

Our team

Customer visit

Hot Tags: charcoal briquette press machine, China charcoal briquette press machine manufacturers, suppliers, factory, commercial tree shredder, home wood chipper, Machine Pellet Wood, charcoal maker machine, Biomass Pellet Line, Fuel pellet production line