Ring Die Straw Pellet Machine

If the pellets are of different lengths, we should adjust the distance of the ring die pellet machine cutter or adjust the position of the material deflection scraper;
Secondly, if the surface of the produced pellets is relatively smooth, but the hardness is too high, it may be that the ring die compression of the ring die pellet machine is relatively large, and the ring die compression ratio should be reduced: if the pellet surface is not very smooth and the powdering rate is high, it may be that the equipment compression is relatively small, and the compression hole should be increased.
We can adjust the opening rate of the wood chip pellet machine screen by adjusting the feeding method, increase the amount of material passing through the screen, thereby ensuring production and keeping the screen holes unobstructed.

When choosing lubricating oil, you must choose the right one. When using lubricating oil, different additives can be added to it when necessary. Different additives have different performances. Therefore, it is also very important to choose lubricants according to the actual situation of different equipment, so that a good lubrication effect can be achieved.
When lubricating the wood chip pellet machine, do not add waste oil directly to save costs. After taking corresponding measures, waste oil can be reused for lubrication. Do not add waste oil directly, which will cause serious damage to the wood chip pellet machine. Waste oil can be dehydrated with an oil-water separator. For impurities in the lubricating oil, it can be removed by a filter. And not all lubricating oils are suitable for wood chip pellet machines.