Is The Wood Pellet Machine Difficult To Operate?
The wood pellet machine is mainly used to grind wet powder into the required pellets, or crush block dry materials into pellets. Its main features include easy installation and disassembly of the screen, which can be adjusted appropriately, and easy to disassemble and clean.
The specific steps for operating the wood pellet machine are as follows:
First, check whether the screws in each part are tightened.
Before starting the machine, loosen the adjustment screws on both ends of the pressure wheel, start the motor, and observe whether the machine rotation is the same as the mark.
| Model | Capacity | Power | Dimensions | Weight |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm | 400kg |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm | 700kg |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm | 800kg |
| MK-400 | 400-600kg/h | 37kw | 1390*650*1290mm | 1000kg |
| MK450 | 600-800kg/h | 45kw | 1620*700*1600mm | 1500kg |
Adjust the pressure wheel screw, feed and grind the material after starting the machine, and grind it repeatedly several times until the template hole is smooth and all the materials are discharged.
Stop feeding before stopping the machine. After the material in the silo is processed, add oil-containing materials and press them into the template hole to keep the hole lubricated to prevent blockage.
In addition, the following matters need to be paid attention to when operating the wood pellet machine:
Ensure that the raw materials are dry and free of impurities, and establish a stable raw material supply channel.
Add fuel quantitatively to ensure uniform distribution in the combustion chamber.
Perform an ignition test before starting the machine, and adjust the firepower and wind speed according to production needs.
Regularly observe the flue emissions, clean up residual fuel and ash, and keep the equipment clean.
